Used control unit in Poland

Baumüller BUS 6V , BUS6-VC-AE-0001 , Servo power unit , Control unit

• Manufacturer: Baumuller

Product description Baumüller BUS6V , BUS6-VC-AE-0001 , Servo power unit , Control unit Technical data IN GOOD OPTICAL CONDITION. SOLD AS USED AND NOT TESTED. NO RETURN, NO WARRANTY. IN GOOD VISUAL CONDITION. SOL...

Pfeiffer Vacuum Power Supply and Control Unit

• Manufacturer: Pfeiffer

Product description PFEIFFER VACUUM, POWER SUPPLY AND CONTROL UNIT Technical data USED, GOOD OPTICAL CONDITION. NOT TESTED. FUNCTIONAL UNTIL DISCARDED, BUT NO WARRANTY AND NO RETURN! USED. IN GOOD VISUAL CONDITIO...

2 Dustman Vacuum Filtration Units With Control

Footprint 2,200 x 2,200mm.

Ladle Furnace For Steel Refining with Control Station

Capacity 30-60 Ton. With Hydraulic Room (Motors, Hydraulic Cylinders, Pumps), Electrical Control Room, Wire Feeder, Manual Hydraulic Control Station, Heraeus Multilab Inspection Units, Heraeus Temperature Inspect...

Technical Sand Mixer Unit with Control & Hopper

Capacity Ø650 x 500mm Deep. With Pneumatic Top Door.

Eco Instal Filtration System With Prodlew Dust Extraction Unit & Control

HAAS ST-10 CNC turning center

• Manufacturer: Haas
• Model: ST-10

was built in 2015 in the United States by HAAS AUTOMATION, INC. The machine, distinguished by its compact design and increased production cycle efficiency, is an excellent choice for both unit and series producti...

KOVOSVIT MAS S80i CNC turning center

• Manufacturer: MAS - Kovosvit

was built by KOVOSVIT MAS a.s. in the Czech Republic. This extremely powerful machine is used for precision hole drilling, threading and turning of cylindrical, conical and spherical surfaces. The offer also incl...

COLCHESTER TORNADO A90 CNC automatic lathe

• Manufacturer: Colchester
• Model: Tornado A90

was built in 2001 in the United Kingdom by 600Lathes. The machine, equipped with a bar feeder, is an excellent choice for precise, fully automatic machining of workpieces with a maximum diameter of 170 mm. The ma...

DMG MORI CTX Beta 2000 CNC turning center

• Manufacturer: DMG Mori
• Model: CTX BETA 2000

was built in 2020 in Italy by Graziano Tortona S.r.l.. This extremely efficient machine is offered together with an extensive range of equipment, which significantly expands the machining capabilities and guarant...

2005 STAR MICRONICS SB-16

• Manufacturer: Star
• Model: SB-16

This 6-axis STAR MICRONICS SB-16 was manufactured in 2005, featuring a FANUC 18i-TB control unit, a maximum machining diameter of 18 mm, and a length per chucking of 200 mm. It boasts a main spindle speed up to 1...