Building Filters
- Trusted Seller
2007 HAAS SL-10
- Manufacturer: Haas
- Model: SL-10
- Spindle bore: 44.45 mm
Used CNC Lathe available. Features a 16.25" swing, 14" machining length, 6.5" chuck size, 1.75" bar capacity, 15 hp power, 6000 RPM max speed, 11" turning diameter, and tailstock.
Ohio, USA - Trusted Seller
2007 KINGSTON CL38C/3000
- Manufacturer: Kingston
7.1" spindle bore Chip Conveyor Control type: Fanuc Oi-TC | Swing: 26″ | Machining length: 120″ | Spindle speed: 1000 RPM | Chuck: 18″ | Equipped with: Chip Conveyor
Ohio, USA - Trusted Seller
2014 DMG MORI NLX 2500/700
- Manufacturer: DMG Mori
- Model: NLX 2500
- Spindle bore: 76 mm
2014 DMG Mori NLX 2500/700 CNC Turning Center, used, offers 2-axis machining with a 28.7" length, 18.1" turning diameter, 3.1" bar capacity. Features tailstock, CNC control, and chip conveyor/coolant system. Perf...
Louisville, KY - Trusted Seller
1995 Shoda Iron Works NC145H-3626
- Manufacturer: Shoda Iron Works
Under Power and Operational! Machine type: CNC | Machine location: Missouri | Stock #: 039054 | Controller: Fanuc Series 15-M | Voltage: 208-220,/440/480V | Phase: 3 | Hz: 60
- Trusted Seller
ANDI STRATUS 5FT X 10FT CNC ROUTER
- Manufacturer: Anderson
- Model: Stratos
General Specifications: - 5′ x 10′ single table with an 8-position ride along tool changer and boring block - 15 H.P router spindle, 3-axis flat table nested base machine - Fanuc control - Includes multi-tap 3-ph...
Hickory, NC - Trusted Seller
2024 Willis 2026 CNC Lathe
- Manufacturer: Willis
Since 1963, Willis Machinery and Tools has been a machine tool supplier, serving a wide variety of businesses throughout the world. With 60 years of providing products and services to businesses worldwide, Willis...
Toledo, OH - Trusted Seller
CLEVELAND TL430 GANG TOOL CNC LATHE
- Manufacturer: Cleveland
See attached pdf for detailed BROCHURE and SPECIFICATIONS
Cleveland, OH - Trusted Seller
2013 Mori Seiki CL-2000
- Manufacturer: Mori Seiki
- Model: CL-2000
Equipped with: Mori Seiki M730BM Control Chuck Shown Tooling Shown on Turret Rear Exit Chip Conveyor
- Trusted Seller
Weeke BHX 055 Vertical CNC Machining Center Stock #57244
- Manufacturer: Homag - Weeke
- Model: BHX 055
Give us a call! Seller is eager to move this machine! 13 Vertical Drilling Spindles Four Horizontal Drilling Spindles in X Two Horizontal Drilling Spindles in Y One Grooving Saw in X 10 HP Router Spindle Four-Po...
Hughesville, PA - Trusted Seller
2022 Poseidon T – Rex Model S Single Table - Stone Equipment - CNC FabCenter
- Manufacturer: Poseidon
Condition (including hours used, if applicable): Low Hours Condition:
Orion Township, MI - Trusted Seller
2009 Haas HPCL
- Manufacturer: Haas
- Model: HPCL
Equipped With: Haas CNC Control Tailstock Collet Type Chuck Gang Style Tool Post
- Trusted Seller
1996 OKUMA IMPACT LU-45 1500
- Manufacturer: Okuma
- Model: IMPACT LU 45
- Spindle bore: 52 mm
CNC Lathe in used condition. Features 33.07" swing over bed, 78.74" between centers, dual turret with 22 tool stations, Okuma OSP7000L CNC control, and 21" chuck. . X-axis Travels: Upper Turret 17.32"/ Lower Turr...
Ohio, USA - Trusted Seller
Miksch CUT 41-0-30-60-S-VX CNC Automatic Tool Changer Index Gear Drive
- Manufacturer: Miksch
New surplus. Drive only, no gearbox or motor. 25mm Input shaft dia. 40mm Output Dia x 26-5/8" Length. 14"W x 18"H Mounting Plate Frame. For tool weights of up to 15kg (33Lbs) If this item ships as Flat Rate Freig...
$5,000 USDMillersburg, IN - Trusted Seller
2011 DOOSAN PUMA TT1800SY
- Manufacturer: Doosan
- Model: PUMA TT1800SY
- Spindle bore: 105 mm
Used CNC lathe with dual turrets and sub spindle. Features include FANUC 31i control, live milling, and Y-axis. Comes with FMB Turbo barfeed, LNS ChipBlaster, and Mist-Fit collector. FANUC 31i-MODEL A CNC CONTRO...
Ohio, USA - Trusted Seller
2015 Okuma LU4000 EX
- Manufacturer: Okuma
- Model: LU4000 EX
Missing Controller Equipped With: Chip Conveyor **Have Inspection Report from Gosiger** Machine is unable to be powered on due to, The machine is missing the front control panel, computer hard drive and hardware....
Harrison Alpha 550 CNC Lathe
- Manufacturer: Harrison
- Model: Alpha 550
Good condition Harrison Alpha 550 CNC Lathes manufactured in 1996. Located in Italy and other countries. Click request price for more information.
Italy
