Used cnc display in Zürich, Switzerland

NUMERICAL CONTROL CNC “ERI” TYPE 2 AXIS

• Manufacturer: ERI

Display LCD – Adaptation on Schaublin table

1981 HAUSER(CH) S 40 - CNC mit ADCOS CNC 400

• Manufacturer: Hauser

Double column CNC jig grinding machine with ADCOS CNC 400 - CNC contouring control replaced in 2007 with an ADCOS CNC control type CNC 400 with large screen and direct programming at the control, with electronic ...

1989 SCHÜTTE WU 500 CNC 6

• Manufacturer: Schutte

6-axis tool grinding machine - SCHÜTTE CNC path control for 6 axes with SIEMENS components and a SIEMENS PLC control S 5-100 U, with color screen, program input directly via keyboard, freely programmable. - vario...

1992 DISKUS DDS 600 III PRM-CNC

• Manufacturer: Diskus
• Model: DDS 600

CNC double sided grinding machine with round feed - SIEMENS CNC control SINUMERIK 810 G with screen, for 4 axes ( infeed top and bottom, dresser and workpiece and workpiece concentricity), direct input of all gri...

HAUSER S 40 CNC

• Manufacturer: Hauser

Control: CNC 311 | Table length: 770 mm | Table width: 630 mm | Table load max.: 500 kg | Longitudinal travel (x-axis): 650 mm | Transversal travel (y-axis): 450 mm | Verticla travel (w-axis): 500 mm | Max. grin...

1990 MORI SEIKI Partner M300 A-1 CNC Machining Center

• Manufacturer: Mori Seiki
• Model: PARTNER M-300
• Spindle taper: BT 40

CNC Machining Center Travel paths: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis) 25 - 325 mm Distance between spindle nose and pallet table (Z-axis) 125 - 620 mm Feed movemen...

2002 HAUSER S 40-CNC 311

• Manufacturer: Hauser

Control: FANUC 210 IS-M | Table length: 770 mm | Table width: 630 mm | Table load max.: 500 kg | Longitudinal travel (x-axis): 650 mm | Transversal travel (y-axis): 450 mm | Vertical travel (z axis): 500 mm | Sp...

HAUSER S 50 L CNC 400

• Manufacturer: Hauser

Control: GE FANUC Series 16-M | Table length: 1320 mm | Longitudinal travel (x-axis): 1200 mm | Transversal travel (y-axis): 600 mm | Travel of the vertical slide: 635 mm | Passage from grinding motor to table: ...

PEARLING MACHINE CNC “ERI” TYPE AUTOMATIC

• Manufacturer: scemama sa

Numerical 3axis – Spindle ERI – Display LCD

2001 WENZEL LH 54 CNC

• Manufacturer: Wenzel
• Model: LH 54

3D Coordinate Measuring Machine with METROLOG II Software - Machine delivered with increased accuracy - Measuring table, traverse and quill made of dark dark natural hard stone, table with 3 x 4 threaded holes fo...

1990 DUNKES HZS 25 CNC

• Manufacturer: Dunkes

Hydraulic CNC controlled single column press, 25 tons, DUNKES C 100 - DUNKES Program control type CNC 100 with data input field for pressure setting, pressure/time switching, stroke up/down, rapid traverse and wo...

PEARLING MACHINE CNC “ERI” TYPE SEMI-AUTOMATIC

• Manufacturer: scemama sa

Numerical control 2axis – Spindle B-8 ERI – Display LCD

1984 HYDRAP HPD-S-500 - CNC

• Manufacturer: HYDRAP

Double stand prod. press for gaskets Very stable double column press with adjustable 4-fold guide Machine was used for leveling and stamping of cylinder head gaskets, which are are brought under the ram via a rot...

NUMERICAL CONTROL CNC “ERI” TYPE 2 AXIS WITH CARRIAGE

Display LCD – Adaptation on Schaublin table

1985 FEHLMANN(CH) PICOMAX 100-CNC 2

• Manufacturer: Fehlmann
• Model: Picomax 100

CNC controlled coordinate drilling machine with HDH-CNC 150 - HEIDENHAIN CNC - 2 axes path control type TNC 150 with color monitor, graphics, with all usual subroutines and cycles, threading cycles, manual contro...