Used cnc display in Zürich, Switzerland

NUMERICAL CONTROL CNC “ERI” TYPE 2 AXIS

• Manufacturer: ERI

Display LCD – Adaptation on Schaublin table

1981 HAUSER(CH) S 40 - CNC mit ADCOS CNC 400

• Manufacturer: Hauser

Double-column CNC jig grinding machine with ADCOS CNC 400 �� CNC contouring control replaced in 2007 with an ADCOS CNC control type CNC 400 with a large screen and direct programming on the control, with electron...

1989 SCHÜTTE WU 500 CNC 6

• Manufacturer: Schutte

6-Axis Tool Grinding Machine �� SCHÖTTE CNC �� 6-axis path control with SIEMENS components and a SIEMENS PLC S 5-100 U, with color screen, program input directly via keyboard, freely programmable. �� Various prog...

1992 DISKUS DDS 600 III PRM-CNC

• Manufacturer: Diskus
• Model: DDS 600

CNC double-sided grinding machine with rotary tool feed �� SIEMENS CNC �� SINUMERIK 810 G control with screen, for 4 axes (top and bottom feed, dresser and workpiece concentricity), direct input of all grinding d...

HAUSER S 40 CNC

• Manufacturer: Hauser

Control: CNC 311 | Table length: 770 mm | Table width: 630 mm | Table load max.: 500 kg | Longitudinal travel (x-axis): 650 mm | Transversal travel (y-axis): 450 mm | Verticla travel (w-axis): 500 mm | Max. grin...

1990 MORI SEIKI Partner M300 A-1 CNC Machining Center

• Manufacturer: Mori Seiki
• Model: PARTNER M-300
• Spindle taper: BT 40

CNC Machining Center Travel paths: X/Y/Z: 400 x 300 x 495 mm Distance between spindle center and pallet table (Y-axis) 25 ��� 325 mm Distance between spindle nose and pallet table (Z-axis) 125 ��� 620 mm Feed mov...

2002 HAUSER S 40-CNC 311

• Manufacturer: Hauser

Control: FANUC 210 IS-M | Table length: 770 mm | Table width: 630 mm | Table load max.: 500 kg | Longitudinal travel (x-axis): 650 mm | Transversal travel (y-axis): 450 mm | Vertical travel (z axis): 500 mm | Sp...

HAUSER S 50 L CNC 400

• Manufacturer: Hauser

Control: GE FANUC Series 16-M | Table length: 1320 mm | Longitudinal travel (x-axis): 1200 mm | Transversal travel (y-axis): 600 mm | Travel of the vertical slide: 635 mm | Passage from grinding motor to table: ...

PEARLING MACHINE CNC “ERI” TYPE AUTOMATIC

• Manufacturer: scemama sa

Numerical 3axis – Spindle ERI – Display LCD

2001 WENZEL LH 54 CNC

• Manufacturer: Wenzel
• Model: LH 54

3D coordinate measuring machine with METROLOG II software Machine delivered with increased accuracy Measuring table, crosshead, and quill made of dark natural hard stone, table with 3 x 4 threaded holes for att...

1990 DUNKES HZS 25 CNC

• Manufacturer: Dunkes

Hydraulic CNC-controlled single-column press, 25 tons, DUNKES C 100 �� DUNKES Program control type CNC 100 with data input field for pressure setting, pressure/time switching, up/down stroke, rapid traverse and w...

PEARLING MACHINE CNC “ERI” TYPE SEMI-AUTOMATIC

• Manufacturer: scemama sa

Numerical control 2axis – Spindle B-8 ERI – Display LCD

1984 HYDRAP HPD-S-500 - CNC

• Manufacturer: HYDRAP

Double-column production press for gaskets Very stable two-column press with adjustable 4-way guide Machine was used for leveling and stamping cylinder-head gaskets, which are fed under the ram via a rotating fee...

NUMERICAL CONTROL CNC “ERI” TYPE 2 AXIS WITH CARRIAGE

Display LCD – Adaptation on Schaublin table

1985 FEHLMANN(CH) PICOMAX 100-CNC 2

• Manufacturer: Fehlmann
• Model: Picomax 100

CNC-controlled coordinate drilling machine with HDH-CNC 150 �� HEIDENHAIN CNC - 2-axis contouring control type TNC 150 with color monitor, graphics, with all standard subprograms and cycles, thread-cutting cycles...