Used automation in Saxony, Germany

SORTIMAT vibration feeder

• Manufacturer: Sortimat

Vibration feeder, sorting shaker, without bowl SORTIMAT SM 3 (SM3) approx. 0.3 m connection cable used, tested! without bowl!

THK ball screw with nut

Ball screw with nut, ball screw drive THK BLK3232D Thread: �� 32 mm Shaft piece: �� 15 mm, Length: 37 mm, Groove width: 5 mm Thread: M20 x 1.0, Length: 14 mm, Groove width: 5 mm Bearing seat: �� 20 mm, Length: 25...

KÖHNY vibration feeder

Vibration feeder, sorting shaker Kühny Special Machines SG270R 3x Electromagnet: E070000118 220 V 50 Hz, 0.5 A approx. 0.3 m connection cable used, tested!

AUGUST STEINMEYER Ball screw spindle

Ball screw with nut, ball screw drive AUGUST STEINMEYER GmbH 1516.523/20.63.936.1147 T5 Thread: �� 62 mm Shaft end: �� 35 mm, Length: 35 mm Thread: M40 x 1.5, Length: 50 mm Shaft piece: �� 40 mm, Length: 90 mm Ba...

GENUSTECH sheet metal centering pull-down unit

Sheet centering pull-down unit GENUSTECH PM4I2V395067T45C-052 Sensor unit: SENSTRONIC A1202R6K250111C 10 - 55 V DC approx. 0.2 m connection cable New !

SORTIMAT vibration feeder

• Manufacturer: Sortimat

Vibration feeder, sorting shaker, with foot pedal SORTIMAT SM 3 (SM3) Used, tested!

PAGUS trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal thread spindle, threaded spindle, with nut PAGUS Shaft thread: M20 x 1.0, thread length: 19 mm Shaft diameter: 25 mm, length: 37 mm Shaft diameter: 30 mm, length: 27 mm Shaft diameter: 40 mm, length: ...

SLMATIC vibration feeder

Vibration feeder, sorting shaker, SLmatic Type 2002 Approx. 1.0 m connection cable with plug Without cover and side panel! Used, tested!

MEHAG vibration feeder

Vibration feeder, sorting shaker, MEHAG approx. 0.5 m connection cable with plug New!

THK ball screw with nut

Ball screw with nut, ball screw drive THK BLK2525D Thread: �� 25 mm Shaft piece: �� 15 mm, Length: 27 mm, Groove width: 5 mm Thread: M20 x 1.0, Length: 14 mm, Groove width: 5 mm Bearing seat: �� 20 mm, Length: 25...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4011-176D-C2Z 98L6-0067 Thread: �� 40 mm Shaft piece: �� 28 mm, Length: 57 mm Thread: M30 x 1.5, Length: 27 mm Bearing seat 1: �� 30 mm, Length: 27 mm Bearing seat 2: ��...

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4014-124D-C2Z 98L6-0035 Thread: �� 40 mm Shaft piece: �� 28 mm, Length: 57 mm Thread: M30 x 1.5, Length: 27 mm Bearing seat 1: �� 30 mm, Length: 27 mm Bearing seat 2: ��...

SCHUNK angular gripper

• Manufacturer: Schunk

Angular gripper, 2-finger angular gripper SCHUNK GM 400 313098 Used, tested!

REXROTH ball screw spindle

• Manufacturer: Bosch - Rexroth

Reifenprofil 3 Thread length: 685 mm | Total length: 790 mm | Slope: 10 mm | Fixed bearing pedestal: 108 x 46 x 70 mm | Movable bearing pedestal: 85 x 45 x 72 mm | Dimensions ( ball screw spindle ): 790 x 108 x 7...

SCHUNK robot module

• Manufacturer: Schunk

Robot module, standard SCHUNK VERO-S NSR 160 471915 Matching clamping pin: AT294 Used, tested!