Used automatic in Saxony, Germany

IWKA TZK100 automatic tube feeding system for conical shaped tubes

• Manufacturer: IWKA

IWKA TZK100 automatic tube feeding system for conical shaped tubes, suitable for conical tubes with a diameter of 12 to 50 mm and a maximum tube length of 235 mm, rod length 730 to 850 mm, capacity from 40 to 100...

Brevetti K32-400 automatic inspection machine for cartridges, 400/min.

• Manufacturer: Brevetti - Motta

Brevetti K32-400 automatic inspection machine for cartridges, inspection of bubbles, fill level, cap defects, stopper defect/position, particles (with three inspection units), with corresponding format parts suit...

Scaligera ULISSE 4000 automatic sleeve applicator for full-body sleeves including shrink tunnel

• Manufacturer: SCALIGERA PACKAGING

Scaligera ULISSE 4000 automatic sleeve applicator for full-body sleeves, with "under-lap" device (after sleeve application to prefix on the bottom of the product) and shrink tunnel, currently set up for container...

Doboy DV semi-automatic volumetric powder filler

• Manufacturer: Doboy Ibérica, S.A

Doboy DV semi-automatic volumetric powder filler, hopper volume approx. 55 litres, electrics 380V/50Hz/16A, machine floor space approx. 600 x 600 mm (LxW), machine height approx. 2000 mm, machine net weight appro...

BWT automatic backwash filter

• Manufacturer: BWT

Automatic backwash filter BWT Infinity AP Flow rate ( at Δ p = 0.2 / 0.5 bar ): 5.0 / 7.5 m³/h Plug-in power supply unit: Input: 100 - 240 V AC 50 / 60 Hz / Output: 24 V DC 0.4 A Connection module AG1" x AG1" ( i...

Multi-channel automatic bandsaw MKS 6/2 #B15442

Manufacturer ZS-Technologie Meißen Type MKS 6/2 year of construction 1998 High performance bandsawing machine for cutting of tubes and round material in multi-channel process with symmetrical material infeed and ...

Cariba C300 horizontal cartoner with automatic bottle infeed

• Manufacturer: Cariba Srl

Cariba C300 horizontal cartoner with automatic bottle infeed, continuous motion, reverse tuck closure, GUK pre-folded leaflet inserter, carton size range: min. 15 x 15 x 55 mm (AxBxC), max. 150 x 90 x 220 mm (AxB...

Automatic feeders for poultry #B16399

not used so far Automatic feeders, plastic for tube feeding motors and feeding spirals not available Chicken feeding system Laying nests Motors and feed spirals not available (can be procured) approx. 1.000 feedi...

AC Automation LC800 semi-automatic L-sealer and shrink tunnel

• Manufacturer: AC Automation

AC Automation LC800 semi-automatic L-sealer and shrink tunnel, belt width approx. 350mm, tunnel entrance approx. 350 x 180mm, sealing bar approx 500 x 400mm (L x W). Floorspace 2600 x 1000mm x 1400mm

Brevetti ATM 15 Duplex automatic inspection machine for pre-filled syringes

• Manufacturer: Brevetti - Motta

Brevetti ATM 15 duplex (2 x modules) automatic inspection machine for syringes, currently set for 10.85mm diameter syringes (long and short needle), output up to 133/minute per module (266 per minute total). Each...

Automatic filter DDFDN 50-1 #B13933

• Manufacturer: DANGO & DIENENTHAL

DDS automatic filter Type DDFDN 50-1 DDS-Filterautomat used year of manufacture 1991

Sepha PRESS-OUT semi-automatic deblistering machine for removing tablets and capsules

• Manufacturer: Sepha

Sepha PRESS-OUT semi-automatic deblistering machine for removing tablets and capsules from push-through blisters without damaging the product, capacity up to 60 blisters/min, mounted on a mobile trolley with coll...

Fully automatic sheet metal processing system Salvagnini

• Manufacturer: Salvagnini

SN: 3000520, material infeed, buffer belt, lowering-bending unit, C-frame press, device no. 915168, output 43 kW, material outfeed belt, stacking unit, switch cabinet, control panel, grid enclosure, light barrier...

Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons

• Manufacturer: Merz

Merz KT160 semi-automatic packing line for packing sticks into pre-folded cartons , 2 lanes (previously the Merz was fed by two 1-lane stickpack machines), inserting of the sticks using 2 Stäubli robots (1 robot...

Fully automatic sheet metal processing system Salvagnini P4-1812

• Manufacturer: Salvagnini
• Model: P4

SN: 2000522, machine no. 915168, power 35 kW, material infeed/buffer, die bending unit, C-frame press, type P4-1812, SN TC27155C, material outfeed, conveyor line, type ADP2715, separate control panel, grid enclos...