Used automated in Geneva, Switzerland

TECHNOSOFT iPOS8015 BZ-CAT 11-80V 15A RMS 1.7kW EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply / STO supply: 11 – 80 VDC / 9 – 36 VDC / 18-40VDC Output current: 15 A RMS continu...

TECHNOSOFT iPOS360x SX-CAN 4-Axis Motion System CANopen/Ethernet

• Manufacturer: Technosoft

Motion system with up to 4 iPOS360x VX-CAN drive controllers For DC brushless, DC brush, stepper, linear, and voice coil motors Power voltage: 9-36 VDC; Logic voltage: 7-36 VDC Up to 4 A continuous, 10 A peak per...

TECHNOSOFT iPOS3604 MX-CAN 9-36V 4A 144W CANopen or EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply: 9 – 36 VDC Output current: 4 A continuous; 10 A peak current Communication via RS...

TECHNOSOFT iPOS4808 MY-STO 11-50V 8A 400W CANopen/TMLCAN

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC Output current: 8 A continuous; 20 A peak current Commu...

TECHNOSOFT iPOS4815 MZ-CAN 11-50V 15ARMS 1kW CAN/TMLCAN

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply / STO supply: 11 – 50 VDC / 9 – 36 VDC / 18-40VDC Output current: 15 A RMS continu...

TUBE TEST BENCH BOT45-2V250

Test bench for pipes with type 2 "internal radial" or 8 "self-adapting overpressure joints" for pipes with an elliptical shape error. The reaction bridges are connected by threaded columns that allow the maximum ...

Vertical test bench BV-PMC/650W

The compression force is controlled automatically and proportionally to the water pressure inside the valve. The movable bridge in the upper part allows the valve to be loaded and also provides the possibility of...

BOT-2CSC/1200 tube test bench

Tube test bench with combined clamping: internal radial clamping + pressure clamping system. The mobile bridge is moved by a hydraulic motor. Loading is carried out vertically by a crane, while final positioning ...

BOR-2CV/600 tilting test bench

The mobile bridge moves forward on two threaded screws that ensure the complete absence of external forces on the valve body. This feature makes the bench compliant with the requirements of international testing ...

MULTIPOST TEST BENCH EBV-CC3V60H

3 x 15 ton test bench with automatic actuators, type 2 and type 7 clamping Three-station vertical test bench with internal radial clamping. Valve length adjustment is achieved by a threaded column on the upper si...

BPA-250K Actuator Test Bench

Rated torque: 250.000 Nm | Range: 10-100% | Torque measurement: Indirect | Range of angles: 0��� ��� 90��� | Reset: -5,0��� ��� +5��� | Dynamic test simulation: Dynamic brake | Dimensions: 2700 x 2600 x 1600

Assembly line BO-CV/40SA

It is also possible to test a very wide range of valves of different sizes. This is made possible by the bench, which is positioned both vertically and horizontally depending on the valve being tested. The entire...

PRESSURE UNIT THINK PC PROGETTI SKC-100

Pressure skid for cycle resistance in the trunnion vehicles. The system provides a total flow rate of 0.7 l/min (0.5 l/min in the downward direction and 0.2 l/min in the cavity). The control system can be connect...

TESTREC certification software

The program can be used with all PROGETTI PC test benches. It is equipped with a MODBUS interface for SKM skids and a SYSWAY interface for SKA skids with Ethernet or RS232 communication protocol. Easy to set up, ...

Horizontal test bench BO30-2CV/500

Test bench with combined clamping: internal radial clamping + pressure clamping system. The movable bridge moves on two threaded screws that ensure the total absence of external forces on the valve body, while a ...