Used applicators in South Korea

GW-Instek LCR-09,Test Fixture, 4 Wire, SMD/Chip test fixture

• Manufacturer: GW Instek

Selling GW-Instek's 4Wire SMD/Chip Test Fixture LCR -09 model (new) for use in LCR Meter. KEY FEATURES - LCR-800/8000G Series - SMD / chip test fixture

'KOBE-HANJUNG-YASKAWA' Skin Pass Mill No. 1 (1995/2019)

• Manufacturer: Yaskawa - Motoman

4 pts inner diam. Measuring devices: · Thickness Gauge (Thermo Fisher Scientific, 2011) · Width Gauge (Palmatech, 2018) · Center Position Controller (Nireco, 2015) · Coil Weigher (Kumyong Yamato, 2019) ROLLING RO...

Complete Stainless Steel Cold Rolling Facility(Combination)

Complete Stainless Steel Cold Rolling Facility from Hyundai Steel STS Incheon  – 1320 mm Stainless 304 and 430  Consists of: LINK Lot No. 2A 'Production Machinery Co.' Annealing and Pickling Lines- Cold All new...

2013 AGIE CUT 300

• Manufacturer: Agie - Charmilles
• Model: CUT 300

This 5-axis AGIE CUT 300 wire EDM machine was manufactured in 2013. It features a maximum taper angle of 30/100° mm, can handle workpieces up to 1050 x 650 x 250 mm, and supports a maximum weight of 400 kg. If yo...

2005 DOOSAN PUMA 240B

• Manufacturer: Doosan
• Model: PUMA 240B

This DOOSAN PUMA 240B was manufactured in 2005. A robust horizontal turning machine featuring a 4500 rpm spindle and a 12-tool turret. Ideal for precision machining tasks. If you are looking to get high quality t...

‘HONDA’ Shearing Line

• Manufacturer: Honda

‘HONDA’ Shearing Line with Side Trimmer and 2 x 6-High Finish Levellers 70 kgs/mm2 > tensile strength > 53 kgs kgs/mm2 52.5 kgs/mm2 > yield points > 21 kgs kgs/mm2 max. 60 mpm max. (0.3 – 2.0 mm) Mechanical equip...

'HONDA' Slitting Line

• Manufacturer: 'HONDA'

‘HONDA’ Slitting Line 70 kgs/mm2 > tensile strength > 53 kgs kgs/mm2 52.5 kgs/mm2 > yield points > 21 kgs kgs/mm2 min. 45 mm exit 508 mm exit 40 m/min max. (2.0 – 3.5 mm) Utilities: Electric power: 60Hz 3Ø 440V ±...

2008 DOOSAN PUMA 240B

• Manufacturer: Doosan
• Model: PUMA 240B

This DOOSAN PUMA 240B was manufactured in 2008. A robust horizontal turning machine featuring a 4500 rpm spindle speed and a 12-tool turret for efficient operations. Equipped with Fanuc Control and main dimension...

'PRODUCTION MACHINERY CO' Coil Preparation Line

• Manufacturer: 'PRODUCTION MACHINERY CO'

‘PRODUCTION MACHINERY CO.’ Coil Preparation Line AISI 300 and 400 series 610 exit 2000 entry and exit max. 2200 mm incl. paper 4 – 10 m lenght max. 40 mm Mechanical equipment list: – Entry Coil Storage Saddle – E...

'Production Machinery Co.' Annealing and Pickling Lines- Cold

• Manufacturer: 'PRODUCTION MACHINERY CO'

‘PRODUCTION MACHINERY’ Continuous Annealing & Pickling Line No. 2 All new piping in 2022 max. 50 kg/mm2 annealed material max. 50 kg/mm2 hot rolled material max. 60 kg/mm2 annealed material max. 50 kg/mm2 hot rol...

2016 OTEC DF10

• Manufacturer: OTEC

This OTEC DF10 was manufactured in 2016. It features a stainless steel process container and jog mode for easy workpiece changes. Includes additional storage for workpieces and holders, accommodating up to 10 hol...

'SMS' 2-Hi Skin Pass Mill

• Manufacturer: 'MANNESMANN DEMAG SACK'

‘SMS-DEMAG-SACK’ Skin Pass Mill AISI 300 and 400 Series, Cold Rolled and Annealed min. 750 mm Mill gear: ratio : I=15,197 max. 1,200 tons max. 630 mm nominal 610 mm Skin Pass Mill Roll Shop: – Roll Grinder KWB8-4...

'Production Machinery Co.' Annealing and Pickling Lines- Hot and Cold

• Manufacturer: 'PRODUCTION MACHINERY CO'

‘PRODUCTION MACHINERY CO’ Continuous Annealing & Pickling Line No. 1 max. 50 kg/mm2 annealed material max. 50 kg/mm2 hot rolled material max. 60 kg/mm2 annealed material max. 50 kg/mm2 hot rolled material 3 – 6 m...

'PRODUCTION MACHINERY CO' Grinding and Polishing Line

• Manufacturer: 'PRODUCTION MACHINERY CO'
• Amperage: 2,022 ampere

‘PRODUCTION MACHINERY CO’ Grinding and Polishing Line AISI 300 and 400 Series (Annealed and Pickled) 3 – 6 mm hot rolled min. 1,000 mm 10 – 20 mpm polishing (high) min. 13,500 kg high speed 4 top side grinders (2...