Used applicators in Groningen, Netherlands

Heat exchanger, stainless steel

• Manufacturer: GEA

Other: Room I:- max. all. work. pressure: -1/+5 bar- max. all. work. temperature: 135° C- volume: 7 LiterRaum II:- max. all. work. pressure: -1/+2 bar- max. all. work. temperature: 135° C- volume: 22 Liter1 heat ...

Alfa Laval 2,45 m² spiral heat exchanger, stainless steel

• Manufacturer: Alfa-Laval

Other: Permitted working temperature: 200° C Canal A: Volume: 12 liters Permitted working pressure: -1/+5 bar Gap width: 6 mm Medium: swamp Canal B: Volume: 15 liters Permitted working pressure: 5 bar Gap width: ...

50m Aventics R412009989 TU1-S-PUR-008-0115-BK0050 pneumatic hose

• Manufacturer: Aventics

The Aventics TU1-S-PUR air hose is a flexible and durable solution for air flow in various machines and systems. With its 50-meter length, it is suitable for both small and large setups. Made of strong material, ...

Hydraulic cylinder from – stroke 260 mm piston Ø 90 mm 9369

Hydraulic cylinder, support cylinder, hydraulic ram, pressure ram

GSL control panel - for aerial work platforms 14138

• Manufacturer: GSL

Control panel, control unit Control panel: for the drive of working platforms of the company GSL (German Standard Lift) | Universal: applicable | Number: 1x module available | Dimensions: 280/250/H360 mm | Mass: ...

2025 Stainless steel heat exchanger - DN160 25263

• Manufacturer: Edelstahl

Heat exchanger, heat exchanger -Example: -Water capacity: 12 m³/h, temperature On: 78°C, temperature Off: 50°C -slurry capacity: 10 m³/h, temperature On: 14°C, temperature Off: 45°C

Planetary gear 1:10 by Wittenstein - LP 090-M01-10-111-000 15490

• Manufacturer: Wittenstein

Gearbox, planetary gearbox for hydraulic motor, hydraulic motor, oil motor, hydraulic pump. -transmission ratio: 1:10

2014 BITZER 6H-35.2Y (2x) + 4H-25.2Y + 4PES-15Y

• Manufacturer: Bitzer
• Model: 6H-35.2Y

Complete Bitzer system with 4 piston compressors (2x 6H-35.2Y + 4H-25.2Y + 4PES-15Y), a liquid vessel (228ltr), a Siemens controller, frequency controllers and a control box. Mentioned capacity at an evaporating ...

2001 HOMAG Optimat KL 78/A20/S2/Z

• Manufacturer: Homag
• Model: Optimat

This HOMAG Optimat KL 78/A20/S2/Z was manufactured in 2001. A robust single-sided edge bander, it features a comprehensive setup including joint milling, a glue premelter, pressure zone, snipping, and flush trimm...

13m Lapp 6FX8002-5DQ38-1BD0 Power Cable Data 6FX80025DQ38

• Manufacturer: Lapp

This high-performance, motion-compatible power cable extension is designed for demanding motion control systems and features a SPEED-CONNECT connector compatible with the MOTION-CONNECT 800PLUS system. Designed f...

2019 DANFOSS SH295A4ABE

• Manufacturer: Danfoss

New unused Danfoss scroll compressor. Mentioned capacity at an evaporating temperature of -5°C and a condensing temperature of +40°C.

2006 ALFA LAVAL HTC091-154V520

• Manufacturer: Alfa-Laval

Nice Alfa Laval Helpman condenser with 5 fans. Mentioned capacity at a condensing temperature of +40°C and an ambient temperature of +25°C when using R404A.

2005 BITZER CSH 8561-90Y

• Manufacturer: Bitzer

Very nice compressor set with 1 Bitzer screw compressor and control box. Mentioned capacity at an evaporating temperature of -5°C and a condensation temperature of +40°C.

Alfa Laval 1.3 m² spiral heat exchanger, stainless steel

• Manufacturer: Alfa-Laval

Other: Permitted Operating temperature: 200° C Channel A: Capacity: 7 liters Permitted Operating pressure: -1/+5 bar Gap width: 5 mm Medium: LM.C Channel B: Capacity: 7 liters Permitted Operating pressure: 5 bar ...

2017 AMADA LC-3015F1NT 4kW CO2

• Manufacturer: Amada
• Model: LC-3015 F1NT

This 3-axis AMADA LC-3015F1NT 4kW CO2 was manufactured in 2017. It features a 4000-watt CO2 resonator and handles a maximum sheet size of 3000x1500mm, including a tower. If you are looking to get high-quality las...