Used applicators in Groningen, Netherlands

1987 GUENTNER S-GHS 80/212

• Manufacturer: Güntner

Nice complete Guentner (blast freezer) evaporator with 12mm fin spacing, which is perfect for a freezing tunnel and equipped with 2 fans. Mentioned capacity at an evaporating temperature of -8°C and 8K. (Q= 15kW ...

Bosch 044619-104410 PS 100 power supply 044619104410

• Manufacturer: Bosch

The Bosch PS 100 (044619-104410) power supply is a rugged, industrial-grade power supply designed for reliable and stable performance in automation and CNC applications. Based on proven Bosch engineering standard...

Beckman type 19 – Fixed Angle rotor

• Manufacturer: Beckman - Coulter

The Beckman aluminium type 19 fixed angle rotor holds tubes at a fixed angle of 25°. During centrifugation, the densest particles in the solution will separate towards the angle of the centripetal force. The roto...

1250 liter conical container made of stainless steel 304

• Manufacturer: Thyssen Umformtechnik

remarks: Frame, Fe (galvanized; slightly bent in some areas); 1 container with DN 80 DIN 11851 outlet; manhole cover screw connections incomplete; container with dents

5500 Liter 8 bar pressure tank, Aisi 304

remarks: 1 manhole approx. 320 x 420 mm in the front bottom (one tank is missing a manhole cover); tanks were attached as chamber tanks to other tanks - they would have to be supported accordingly on site for ins...

1000 Liter IBC Container, Aisi 304

• Manufacturer: Stöcklin

remarks: Frame, Fe (galvanized); slight differences in design possible; Ball valve made of brass (nickel-plated);

1000 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete or no longer exists (this would have to be compensated accordingly on site for installation); not every tank may have a spray ball

900 liter oval tank, Aisi 316

remarks: Height-adjustable screws of the feet incomplete (this would have to be compensated accordingly on site for installation); Not every tank may have a spray ball

13650 liter heat-/coolable cubic storage tank, Aisi 304 with 3 internal cooling plates

remarks: 3 cooling plates inside the tank (1 x loose, see photos); 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom material temperatur control system: AISI 304 (V2A) 1.4301

12280 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; slight differences in foot length (take into account during installation) material temperatur control system: AISI 30...

11320 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 340 x 440 mm in the front bottom; smaller dents in the upper bottom; 1 side wall slightly pushed inwards material temperatur control system: AISI 304 (...

10460 liter heat-/coolable cubic storage tank, Aisi 304 with 2 internal cooling plates

remarks: 2 cooling plates inside the tank; 1 manhole approx. 300 x 400 mm in the front bottom; smaller dents in the upper bottom; smaller dents in the upper bottom; feet partially supported with stainless steel p...

1000 liter storage tank, Aisi 304

remarks: Manhole diameter: approx 395mm; partially defective disc valves; partial dents on some containers

400 liter conical tank, Aisi 316

remarks: Cone height appr. 400 mm; 3-legged frame, Aisi 304; 3 short pipes inside the tank

1025 liter container, Aisi 304

• Manufacturer: Azzini

remarks: Frame made of Fe (galvanized); 1 dent in the cylinder; smaller dents in the lower bottom; suspension of the manhole cover incomplete; the clamping ring of the manhole cover is missing (1 matching brand-n...