Used agitators in Hamburg, Germany

630 liter insulated agitator tank, Aisi 304 with propeller agitator

remarks: Double jacket made of mild steel for heating / cooling; according to the previous operator, it was used until the end (no guarantee for functionality of the double jacket); 1 stronger dent as well as sma...

820 liter agitator tank, Aisi 304 with propeller agitator

Volume: 820 liter | Stand type: legs | Quantity legs: 3 Piece | Diameter inside: 890 mm | Cylindrical height: 1.200 mm | Total height: 1.800 mm | Manhole: in the upper bottom | Outlet: 32 mm | Notice: some resid...

5870 liter isolated agitator tank, Aisi 304 with blade agitator

Volume: 5.870 liter | Stand type: legs height adjustable | Quantity legs: 6 Piece | Insulation: available | Insulating jacket: welded | Insulation material: PU - foam | Total height: 2.000 mm | Total width: 2.02...

2900 liter insulated agitator tank, Aisi 304 with anchor agitator

Volume: 2.900 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Insulation: available | Insulating jacket: hermetically welded | Insulation material: stone wool | Diameter inside: 1.800 mm | ...

500 liter pharmacy agitator tank, Aisi 316 with blades agitator

EX-proof: motor is ex-proof (compliance with the new ATEX directives must be verified, taking into consideration the local conditions) agitator features: Attention: Stirrer shaft (1.4301) and baffle (1.4541), Ais...

3800 liter insulated agitator tank, Aisi 316 with 2 agitators

remarks: 3-legged frame, stainless steel with load cells (no guarantee on the functionality of the load cells)

3250 liter agitator tank, Aisi 316 with blades agitator

notice: some residues of previous content, pipe end cut flush remarks: Sheet metal cutouts in the lid; outlet probably diameter 80 mm

5000 liter agitator tank with blade agitator, Aisi 304

agitator features: Agitator arranged eccentrically on a welded crossbar

200 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: URBAN

agitator features: Drehzahlregelung über Frequenzumrichter (siehe Fotos)

4500 liter coolable agitator tank, Aisi 304 with blades agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket with trickle ring - only suitable for pressureless cooling; a rectangular sheet was cut out o...

1300 liter heat-/coolable agitator tank, Aisi 316 with anchor agitator

Temperature control cylinder (dj): double jacket temperature control bottom (dj): double jacket remarks: Double jacket around half of the cylinder height; 4 support brackets, Aisi 304 (parts of the brackets were ...

300 liter agitator tank (powder mixer), Aisi 316 with propeller agitator

remarks: Manhole diameter approx. 410 mm; Support ring and plate on the outside of the lower bottom made of Fe; Grayish protective coating on the outside

700 liter agitator tank, Aisi 316 with propeller agitator

remarks: Agitator, Aisi 304 (1.4541); Feet with pedestal and screws made of Fe

2210 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Rieger

max. allowable working temperature: 90 °C remarks: 4 support brackets, Aisi 304; Manhole diameter approx. 420 mm; Insulation around the cylinder only; The previous operator had the two tanks in a stainless steel ...

12000 liter insulated agitator tank, Aisi 304 with 2 propeller agitators

• Manufacturer: Waldner

remarks: 1 partition (with openings) in the middle of the tank divides the cylinder length of 5000 mm into 2 x 2,500 mm; lower area in the inner tank straight instead of round due to the design; both tank chamber...