Used agitators in doitsu

Groen DTA/3-60 60-Gallon 2/3-Jacketed Cooker/Mixer With Twin Shaft Agitators

• Manufacturer: Groen
• Model: DTA3-60

Unit is USED with visible minor surface wear and some minor scratches none affecting the functionality or the intended use of the unit. Inside of kettle is clean and free of any dried debris. Unit was removed fro...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

ITEM #: 01505.02 USED ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. 17.25" X 11" DISCHARGE. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRI...

Ekato HWL 2120 A Reactor Agitator 7.5kw 35.93:1

• Manufacturer: Ekato

“REFURBISHED” Model number: HWL 2120 A | Power: 7.5 KW | Ratio: 35.93:1 | Mpn: HWL 2120 A | Shipping weight: 770 lbs | Shipping dimensions: 38 x 36 x 22 in | Additional notes: REFURBISHED | Reference sku: 1644690

Chemineer 3GTD-10 Turbine Agitator 10hp 11.60:1

• Manufacturer: Chemineer

“New without Factory Packaging” Model number: 3GTD-10 | Output diameter: 0.031749982855009 M | Power: 7457.0103354163 W | Ratio: 11.60:1 | Mpn: 3GTD-10 | Shipping weight: 553 lbs | Shipping dimensions: 27 x 19 x ...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

ITEM #: 01505.03 USED ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER CARBON STEEL CONSTRUCTION. 48" W X 46" LONG X 22" DEEP. TWO RIBBON TYPE SCREWS 20" DIAMETER X 45" LONG. 11" X 17" DISCHARGE. DRIVE IS UN...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

ITEM #: 01505.01 USED ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRIVE IS 1/3 HP 1725 RPM, 2...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRIVE IS 1/3 HP 1725 RPM, 230/460 VOLT. REDUCER IS MORSE SN 74I-8425; RATIO OF 15:1.

Mepaco Model: 170 - 4000lb Capacity Mixer-Blender w/Dual Paddle Agitators

• Manufacturer: Mepaco

Unit is USED and in very good condition. Unit shows signs of some visible minor surface wear, scratching on the outside, otherwise not affecting intended use of the unit. What you see in the picture is what is in...

1 HP Mixer/Agitator with Stainless Steel Shaft

used 1 HP Mixer/Agitator with Stainless Steel Shaft. 230/460 volt, 1725 RPM. Bridge mount (4' L x 1' W) or remove and mount on flange. Stainless Steel Shaft is 3/4" diameter x 4'L with (2) prop type blades appr...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

CARBON STEEL CONSTRUCTION. UNLOADER #01 & #02 IS 36" X 36" X 20" DEEP. 17.25" X 11" DISCHARGE. HAS TWO RIBBON TYPE SCREWS IN UNLOADER; DRIVE IS 1/3 HP 1725 RPM, 230/460 VOLT. REDUCER IS MORSE SN 74I-8425; RATI...

ACRISON MULTIPLE AGITATOR BIN DISCHARGER UNLOADER

• Manufacturer: Acrison

CARBON STEEL CONSTRUCTION. 48" W X 46" LONG X 22" DEEP. TWO RIBBON TYPE SCREWS 20" DIAMETER X 45" LONG. 11" X 17" DISCHARGE. DRIVE IS UNMOUNTED, 3/4HP 1725 RPM, 208-220/440 VOLT. REDUCER IS MORSE SN 75M05009;...

clamp-on stainless steel mixer/variable speed agitator

Used clamp-on stainless steel mixer / variable speed agitator with digital readout. Driven by 1/2 HP, 1725 RPM, 115 Volt, single phase motor. Has a 30" lgth. shaft with collapsible agitator blades (approx. 8" i...

PFAUDLER GLASS COATED AGITATOR SHAFT - 44"Ø SPAN

• Manufacturer: Pfaudler

ITEM #: 11674 PFAUDLER GLASS COATED AGITATOR SHAFT - 44"Ø SPAN 3.5"Ø SOLID CARBON STEEL SHAFT ENTIRELY GLASS COATED FROM DRIVE END. THE STEPPED-DOWN DRIVE CONNECTION IS 3.0"Ø X 2.25" LONG WITH A 0.75" KEYWAY. L...

GRACO 25C013 Control Air Elevator XD Agitator Series E21A

• Manufacturer: Graco

This listing is for a USED GRACO 25C013. It is designed for fluid agitation and elevation in spray systems. This unit is categorized as a Control Air Elevator XD Agitator and includes the following capabilities: ...

PFAUDLER GLASS COATED AGITATOR SHAFT - 44"Ø SPAN

• Manufacturer: Pfaudler

3.5"Ø SOLID CARBON STEEL SHAFT ENTIRELY GLASS COATED FROM DRIVE END. THE STEPPED-DOWN DRIVE CONNECTION IS 3.0"Ø X 2.25" LONG WITH A 0.75" KEYWAY. LIKELY DESIGNED FOR A 48"Ø TANK OR LARGER. OVERALL LENGTH: 91"