Used agitators in Hamburg, Germany

400 liter agitator tank, Aisi 304

remarks: insulation was added later by the previous owner; insulation slightly torn; agitator features: additional inclined blade agitator installed; Dissolver agitator teeth bent;

Agitator tank 5.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with conical bottoms, eccentric top-mounted bucket agitator, without drive, with external half-pipe coil on the cylinder, 2 circuits and 1 circuit on the lower bottom, ope...

1200 tank, Aisi 304 with propeller agitator

agitator features: Motor-/gear unit incomplete and with signs of corrosion

Agitator tank 4 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet made of iron, height-adjustable, with upper domed base and lower conical base, internal heating ring on the lower base, heating surface approx. 0.5 m², pressure 6 bar, agit...

350 liter insulated agitator tank, Aisi 304

remarks: Smaller dents in the insulation jacket (see photos) agitator features: Further agitator data cannot be read; Corrosion on the motor; Propeller bent (see photos)

Transport container 0.5 cbm, agitator

• Manufacturer: Sielmann

Operating data: Operating pressure 1 bar, according to the nameplate Design: Cylindrical, standing on 4 feet, with forklift pockets, with a curved upper base and a conical lower base. Propeller agitator from abov...

850 liter agitator tank; Aisi 304

Volume: 850 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Ground clearance: 320 mm | Diameter outside: 920 mm | Cylindrical height: 1.250 mm | Total height: 2.200 mm | Manhole: in the upp...

Agitator tank 0.4 cbm, double jacket, insulated

• Manufacturer: Sielmann

Design: cylindrical, suspended in a Fe frame, 1,000 x 1,115 x 1,250 mm. Flat, split lid at the top, loose. With a curved bottom. Propeller/inclined blade agitator mounted from the top center, without motor and wi...

10000 Liter tank, Aisi 304 with propeller agitator

• Manufacturer: Rieger

remarks: 1 manhole approx. 320 x 420 mm in the cylinder, 1 handhole diameter 250 mm in the upper bottom; total height according to drawing; Tank on base plate with slope to the outlet (for installation, an approp...

2000 Corex drum agitator 96339

• Manufacturer: Corex

Pneumatic lifting agitator: 1,5 kW

Agitator tank 0.5 cbm, heating coil

• Manufacturer: Sielmann

Design: cylindrical, standing on 4 wheels, with a flat bottom and a flat top cover, 1/3 hinged with access protection, the rest is bolted. Central cross member for a 0.37 kW, 78 rpm pitched blade agitator. Intern...

15000 liter standing mixing vessel; Aisi304 with balde agitator

Volume: 15.000 liter | Lower bottom: torispherical bottom | Stand type: legs | Diameter outside: 2.300 mm | Cylindrical height: 2.700 mm | Total height: 4.350 mm | Manhole: in the upper bottom | Outlet: availabl...

5000 Liter insulated agitator tank, Aisi 304 with blades stirrer

Volume: 5.000 liter | Lower bottom: cone shaped bottom | Stand type: legs height adjustable | Quantity legs: 4 Piece | Insulation: available | Insulating jacket: hermetically welded | Material insulation jacket:...

Agitator tank 0.67 cbm, heating coil

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with a flat bottom sloped towards the outlet. Propeller agitator 0.37 kW, 1,320 rpm. Internal heating coil made of 1" pipe, 2 turns, designed for operatin...

500 liter mobile tank, Aisi 304 with propeller agitator

remarks: Hand hole diameter: approx. 140mm with sight glass;