Used agitators in Groningen, Netherlands

Agitator tank 0.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with curved bottoms. Agitator in the dome cover 0.37 kW, 270 rpm. Connections: 1 dome DN 350 in the upper side of the bottom, as well as 4 x DN 25 and 1 x DN 50 in the cyl...

Agitator tank 0.26 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, open at the top, with a curved bottom with a Trombone cross, propeller agitator with stabilizing ring, 0.44 kW, 910 rpm, connections: spray ring line at the top, outlet 1"...

13000 liter agitator tank, Aisi 304

• Manufacturer: Jorns

max. allowable working temperature: 50 °C remarks: Manhole appr. 325 x 440 mm; smaller dents in the cylinder

Dispersing agitator made of stainless steel

• Manufacturer: ALFA-LAVAL

Other: Stirrer shaft material: 1.4401 (stainless steel 316) Stator basket material: 1.4541 (stainless steel 304) Total length approx. 1,450 mm EX-proof: motor is ex-proof (compliance with the new ATEX directives ...

1200 tank, Aisi 304 with propeller agitator

agitator features: Motor-/gear unit incomplete and with signs of corrosion

Agitator tank 4 cbm, insulated

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet made of iron, height-adjustable, with upper domed base and lower conical base, internal heating ring on the lower base, heating surface approx. 0.5 m², pressure 6 bar, agit...

VMI Agitator DALLE HYD T110DE - Stirrer

• Manufacturer: VMI Agitator

Check: New arrivals | Material: Stainless steel

VMI Agitator DALLE HYD T110DE - Stirrer

• Manufacturer: VMI Agitator

Check: New arrivals | Material: Stainless steel

VMI Agitator DALLE HYD T110DE - Stirrer

• Manufacturer: VMI Agitator

Check: New arrivals | Material: Stainless steel

Transport container 0.5 cbm, agitator

• Manufacturer: Sielmann

Operating data: Operating pressure 1 bar, according to the nameplate Design: Cylindrical, standing on 4 feet, with forklift pockets, with a curved upper base and a conical lower base. Propeller agitator from abov...

Agitator tank 5.5 cbm

• Manufacturer: Sielmann

Design: cylindrical, standing on 3 feet, with conical bottoms, eccentric top-mounted bucket agitator, without drive, with external half-pipe coil on the cylinder, 2 circuits and 1 circuit on the lower bottom, ope...

850 liter agitator tank; Aisi 304

Volume: 850 liter | Stand type: legs height adjustable | Quantity legs: 3 Piece | Ground clearance: 320 mm | Diameter outside: 920 mm | Cylindrical height: 1.250 mm | Total height: 2.200 mm | Manhole: in the upp...

Stainless steel 316 propeller agitator

Other: Total length approx. 1,300 mm | Manufacturer stirrer: PRG | Agitator: propeller | Output speed: 1445 rpm | Voltage: 230/400 Volt | Power: 3 KW | Material in contact w/ medium: AISI316 1.4401 / 1.4404 | Sh...

350 liter insulated agitator tank, Aisi 304

remarks: Smaller dents in the insulation jacket (see photos) agitator features: Further agitator data cannot be read; Corrosion on the motor; Propeller bent (see photos)

Agitator tank 0.4 cbm, double jacket, insulated

• Manufacturer: Sielmann

Design: cylindrical, suspended in a Fe frame, 1,000 x 1,115 x 1,250 mm. Flat, split lid at the top, loose. With a curved bottom. Propeller/inclined blade agitator mounted from the top center, without motor and wi...