Used 12 bit analog input module

Yokogawa DL750

• Manufacturer: Yokogawa

Yokogawa DL750 Details Yokogawa DL750 Bandwidth: 3 Mhz Channels: 16 With up to 16 Analog channels and one GigaWord memory, this powerful ScopeCorder delivers the performance you're looking for. Just a few minute...

Keithley KUSB-3102

• Manufacturer: Keithley
• Model: KUSB-3102

This Series of Digital I/O Boards brings true plug-and-play data acquisition to computers that contain Universal Serial Bus (USB) 2.0 and 1.1 ports. No need to open up your computer chassis to install boards. Jus...

ABB AI845 Analog Input Redundant Module

• Manufacturer: ABB

Additional Information Also single 1x8ch. HART communications. 0(4). .20mA, 0(1). .5V, 12bit, single ended, 0.1% , Rated isol. 50V. Current limited transmitter power distribution. Advanced on-board diagnostics.Us...

F6217 HIMA 8 channel safety-related analog input module

• Manufacturer: Hima

Description: F 6217: 8-channel analog input module F 6217: 8-channel analog input module safety-related, applicable up to SIL 3 according to IEC 61508 - for current inputs 0/4... .20 mA, voltage inputs 0.... .20 ...

CFP-AI-100 - ANALOG INPUT MODULE - NATIONAL INSTRUMENTS - 8CH 12BIT

• Manufacturer: National Instruments

ANALOG INPUT MODULE 8CH 12BIT

NEW GE Fanuc IC200ALG260E Analog Input 12Bit Volt/Curr 8CH Module- W/O ORIG.BOX

• Manufacturer: Fanuc

NEW GE Fanuc IC200ALG260E Analog Input 12Bit Volt/Curr 8CH Module- W/O ORIG.BOX “NEW WITHOUT ORIGINAL BOX. THE PRODUCT HAS NEW AND NEVER BEEN USED, EVEN THOUGH THE BOX WAS OPENED.SEE ALL THE PHOTOS FOR THE ITEM’S...

I/O module SANMOTION C S500 AM571

• Manufacturer: Sanyo Denki

Item: I/O module | Interface: Analog input/output | Input power supply [v]: DC24 | No. of inputs: 4 analog inputs | No. of analog outputs: 4 | Mass [g]: 87 | Operating ambient temperature: 0 ～ +55℃ | Operating h...

235-0KD22-0XA0

235-0KD22-0XA0235-0KD22-0XA0 - Model EM235 4 inputs/1 outputs ×12bits Product Description 4AI,1AO; 12 bits resolution voltage output; 11 bits resolution current output

332-5HD01-0AB0

• Manufacturer: Kernal Automation

332-5HD01-0AB0332-5HD01-0AB0 - Model SM332 4AO Product Description 4AO; Resolution:12bits; High-accuracy Power consumption ·From bus curren

TECHNOSOFT iPOS8015 XZ 12-80V 15ARMS 1kW CANopen or EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless rotary and linear motors, voice coils, DC brush and step motors Motor supply / logic supply / STO supply: 12 – 80 VDC / 9 – 36 VDC / 18-...

TECHNOSOFT iPOS8015 MZ 12-80V 15ARMS 1kW CANopen or EtherCAT

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless rotary and linear motors, voice coils, DC brush and step motors Motor supply / logic supply / STO supply: 12-80 VDC / 9 – 36 VDC / 18-40...

6ES7334-0KE00-0AB0 SIMATIC S7-300, ANALOG MODULE

SIEMENS S7-300 6ES73340KE000AB0 SIMATIC S7-300, ANALOG MODULE,SM 334, OPTICALLY ISOLATED,,4AE/2AA, 12 BIT, 0-10V F. PT100,(CLIMAT RANGE -120 - 155 DEGR.),AND 10 KOHM MEASURING RANGE,,1 X 20 PINSIMATIC S7-300, ANA...

ABB AI931S Analog Input Module

• Manufacturer: ABB

3.Performance: 12-bit resolution, 1ms conversion cycle (for 4 inputs + 2 outputs); input resistance is approx. 330Ω in current mode and over 100kΩ in voltage mode. 5.Other Features: Supports HART communication fo...

ABB AI910S Analog Input Module

• Manufacturer: ABB

3.Performance: 12-bit resolution, typical accuracy of ±0.1% of full scale, high input impedance (>250kΩ typically), and high common-mode rejection ratio (>80dB typically). 5.Additional Features: HART communicatio...

TECHNOSOFT iPOS4808 MY-STO 11-50V 8A 400W CANopen/TMLCAN

• Manufacturer: Technosoft

Intelligent, compact and freely programmable motor controller For brushless, DC brush and step motors Motor supply / logic supply: 11 – 50 VDC / 12 – 36 VDC Output current: 8 A continuous; 20 A peak current Commu...