Used Carlton Machine Tools

CARLTON 3A #0893424

• Manufacturer: Carlton
• Model: 3A

180 BASE WITH SMALL KICKER L BASE Area of base: 56" X 36" | Spindle speeds: (36) 18 TO 1800 RPM | Spindle feeds: (18) .004 TO .125 IPR | Tap leads: 8, 11-1/2, 14, 18 TPI | Spindle travel: 18" | Diameter of spindl...

CARLTON 2451 #0364324

• Manufacturer: Carlton

CARLTON 3A #0844121

• Manufacturer: Carlton
• Model: 3A

Area of base: 72" X 42" | Spindle speeds: (36) 15 TO 1500 RPM | Feeds: (18) .004 TO .125 IPR | Threads: 8,11-1/2, 14, 18, TPI | Diameter of spindle: 3-3/16" | Taper in spindle: 5 MT | Spindle travel: 18" | Dista...

Carlton SP5014 (4WD)

• Manufacturer: Carlton

Self-Propelled, 4WD, High & Low Gear, 40 HP Vanguard Gas Engine, 14" Cut Depth, 34" Cut Height, Factory Warranty. *Photos are stock photos and may not depict actual machine.

Carlton Radial Drill Table 29015T

• Manufacturer: Carlton

16" x 25" side surface area 3 T Slots on Top Of Table 2 T Slots Side Surface

1986 CARLTON 5A #0893524

• Manufacturer: Carlton
• Model: 5A
• Column size: 558.8 millimeter

VERTICAL TRAVEL OF SPINDLE IN HEAD . 20" MAXIMUM DISTANCE SPINDLE TO COLUMN . 109-3/4" MINIMUM DISTANCE SPINDLE TO COLUMN . 27" EQUIPPED WITH: 96" HALF MOON BASE POWER ELEVATION & CLAMPING OF ARM ON COLUMN POWER ...

1986 CARLTON 1A #0893624

• Manufacturer: Carlton
• Model: 1A
• Column size: 279.4 millimeter

L-BASE DESIGN BASE Size: 4' X 11" | Arm length: 4' | Column diameter: 11" | Spindle speeds: (12) 120 - 3000 RPM | Feeds: (6) .006" - .025" | Diameter of spindle: 2-1/2" | Spindle taper: #4 MT | Spindle travel: 12...

1986 CARLTON 1A #0893724

• Manufacturer: Carlton
• Model: 1A
• Column size: 279.4 millimeter

L-BASE DESIGN Arm length: 5' | Column diameter: 11" | Spindle speeds: 40 TO 1500 RPM | Feeds: (6).006- .025" | Diameter of spindle: 2-1/2" | Spindle taper: #4 | Spindle travel: 12" | Area of base: 36" X 66" X 8-1...

1954 CARLTON 3A #1902518

• Manufacturer: Carlton
• Model: 3A

SPECIFICATIONS: Area of base: 65' X 42" | Spindle speeds: (36) 15 TO 1500 RPM | Spindle feeds: (18) .004 TO .125 | Tap leads: 8, 11-1/2, 14, 18 TPI | Diameter of spindle: 3-3/16" | Taper in spindle: #5 MT | Dista...

CARLTON 3' ARM X 11" COLUMN

• Manufacturer: Carlton

#4 M.T. IN SPINDLE 2-1/2" QUILL DIAMETER 10" QUILL TRAVEL MANUAL CLAMPING ON ARM MANUAL CLAMP ON HEAD POWER ELEVATION BOX TABLE 20" x 24" x 20" WIRED 440 VOLT/3PHASE Can be seen under power on our showroom flo...

CARLTON 3' ARM X 9" COLUMN

• Manufacturer: Carlton

#4 M.T. IN SPINDLE 2-1/2" QUILL DIAMETER 10" QUILL TRAVEL MANUAL CLAMPING ON ARM MANUAL CLAMP ON HEAD POWER ELEVATION BOX TABLES 12"x12"x15 3/4" and 12" x 11 1/2" x 13" WIRED 440 VOLT/3PHASE Can be seen und...

CARLTON 7' ARM X 19" COLUMN

• Manufacturer: Carlton

7' Arm 19" diameter column EX HEIGHT COLUMN Spindle Speeds 7 1/2-750 RPM w/ 1/2 speed 878 RPM motor (15) 1-97 threads per inch 4" Quill Diameter Rapid on head Coolant System #6 MT spindle taper 20" spindle t...

CARLTON 4'ARM X 15"COLUMN

• Manufacturer: Carlton

POWER CLAMPING POWER ELEVATION (APPROXIMATELY 36" VERTICAL TRAVEL) POWER LEFT & RIGHT ON THE HEAD #5 MT IN SPINDLE COOLANT aprox 64" max under spindle Overall dimensions123" Left to Right, 50" Front to Bac...

CARLTON 3' ARM X 13" COLUMN

• Manufacturer: Carlton

POWER CLAMPING POWER ELEVATION 20" X 20" TILT & SWIVEL BOX TABLE aprox 54" max under spindle Can be seen under power on our showroom floor!!

CARLTON 3A

• Manufacturer: Carlton
• Model: 3A

ONE USED - 4’x13” CARLTON Radial Arm Drill 58” Maximum Height Under Arm #5 MT Spindle Spindle Speeds from 15 to 1500 RPM Power Elevation T slotted Box Table Coolant Pump 15 HP 220/440 Volt Electrics