Used Agitators

Acrison Screw Feeder M1714bih40cb032 #16694

• Manufacturer: Acrison

Stainless steel single screw feeder by acrison, model m1714bih40cb032, type ichshof, part# 207-1567, manufacturers # (serial) 1117. Features all 316 stainless steel sanitary product contact surfaces, . 750" od fe...

United Equipment Technologies XCEL 500

• Manufacturer: United Equipment Technologies

Right angle gearbox and motor, for top entering tank agitator. Model XCEL 500. Motor is 15 HP, 1800 rpm. United Equipment Technologies Corp. Includes Falk Right angle gear box. Output 47 rpm. This is gearb...

Columbian TecTank Vertical Stainless Steel Tank on Legs, Top Entering Agitator, Rigging Fee: $1000

Columbian TecTank Vertical Stainless Steel Tank on Legs, Top Entering Agitator, Cone Bottom, Side Entering Manhole, Approx size 5 ft dia x 13'-3" tall for capacity 1946 gallons, Used as SS Tank South of Water Tan...

0.5 HP Rayneri Agitator Head Type SB 18

Used RAYNERI agitator head-Type SB 18 n° 70867-Without shaft and turbine-ATAV HP motor Hp 0.5 - Rpm 1430 - 230/400 volts-On frame-Without electrical cabinet

LOT (3) POLYFAP DIP TANKS, APPROX 10 X 6.5 X 5.5 W CHEMINEER AGITATOR MOTOR, APPROX 10 X 5 X 5.75 FT

• Manufacturer: Chemineer

LOT (3) POLYFAP DIP TANKS, APPROX 10 X 6.5 X 5.5 W CHEMINEER AGITATOR MOTOR, APPROX 10 X 5 X 5.75 FT, APPROX 11 X 13 X 5.5 FT W FLOAT [EAST BLDNG]

Stainless Steel Cage Agitator 4 KW Ex Design

Used stainless steel cage agitator. Diameter of cage 100 mm with three blades impeller inside. Working length of shaft 725 mm. Total length 830 mm. Shaft is driven by 4 kW, 2895 rpm, 400/690 V, 50 Hz, EEx de II e...

2 HP Rpm 2850 Silverson agitator Type DX

• Manufacturer: Silverson

Used SILVERSON stainless steel agitator-Type DX-Turbine DIA 98 mm with 4 blades, shaft DIA 16 mm, Height 600 mm-On inclined flange + handle-Control: BROOK Hp 2 motor, Rpm 2850, 380 volts-Without electrical cabinet

Headspace Agitator for CTC Combi Pal

• Manufacturer: CTC

A 90-day warranty is included. Multiple available.

Vertical Carbon Steel Tank on Legs, Top Entering Agitator, Approx 4 ft dia x 9 ft, Rigging Fee: $300

Vertical Carbon Steel Tank on Legs, Top Entering Agitator, Approx 4 ft dia x 9 ft tall for capacity of 850 gallons, Used as RDO Tank, Rigging Fee: $300

Used Beckart Environmental Inc. 3700 gallon vertical fiberglass mix tank

• Manufacturer: Beckart

Used Beckart Environmental Inc. 3700 gallon vertical fiberglass mix tank. 7' diameter X 12'-3" high straight side. Rated 1.20 Specific Gravity at 100 F. Open top, dished bottom. Material of Construction: Resin: D...

Used Beckart Environmental Inc. 2800 gallon vertical fiberglass mix tank

• Manufacturer: Beckart

Used Beckart Environmental Inc. 2800 gallon vertical fiberglass mix tank. 7' diameter X 9'-3" high straight side. Rated 1.20 Specific Gravity at 100 F. Open top, dished bottom. Material of Construction: Resin: De...

Used Beckart Environmental Inc. 3700 gallon vertical fiberglass mix tank

• Manufacturer: Beckart

Used Beckart Environmental Inc. 3700 gallon vertical fiberglass mix tank. 7' diameter X 12'-3" high straight side. Rated 1.20 Specific Gravity at 100 F. Open top, dished bottom. Material of Construction: Resin: D...

3000 Gallon Stainless Steel Mixing Tank with Agitator

This 3,000 Gallon Stainless Steel Tank with Mixer is for sale. Capacity: 3,000 gallons Open top, dish bottom Agitation: 2.3 horsepower motor 220/440 volts 3 phase 60 hertz Bottom center discharge outlet:...

100 Litre Rayneri Mixing Skid With Agitator

Used RAYNERI mixing skid with agitator Stainless steel mixing vessel Ø 500 x 550 mm - 100 litre Centripetal agitation controlled by a Hp 0.5 gear motor - 220/380 volts Stainless steel buffer tank Ø 500 x 550 mm -...