Used Processing in Opole, Poland

Kohlbach biomass stove 400 KW heating power 29

Furnace with 400 KW heating power TYPE K 8 - 400 Furnaces for biomass, bark, woodchip, sawdust. Fuel feeder Heat exchanger from 2009

Furnace, blowing and extraction fans

Fans of various parameters, in working order.

Urbas 4 MW furnace

Furnace with heating capacity of 4 MW Furnaces for biomass, bark, woodchip, sawdust. Moisture content of the material up to 60% Furnace available from July-August 2025

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Belt conveyor with bevel for grain, etc.

Grain conveyor Level length 1.20 m Bevel length 3.30 m Level length at the top 1 m Belt width 39 cm Total width 65 cm Chute 25 x 15 cm Discharge at a height of 3.20 m

Conveyor belt, conveyor belt, driven TA 254

Length 5.20 m Tape width 55 cm, tape with takers Total width 90 cm Height 35 cm Motor approx. 1 KW

Scraper, redler for sawdust, woodchips, etc. 58

• Manufacturer: ats maszyny drzewne asoltys kbanas sc

Length 7, 50 m Length of takers 28 cm Dimensions of the channels 29 x 18 cm

Conveyor belt, conveyor belt TA 253

Length 22 m Tape width 30 cm New tape Total width 40 cm Motor 1,7 KW

Vibrating trough, vibrorn 16

Length 12.50 m, total 13 m Trough width 65 cm Total width 85 cm Gutter height 20 cm Total height 80 cm Motor 5.5 KW

Conveyor belt, conveyor belt TA 260

Horizontal length: 3.50 m, diagonal length: 2.50 m Belt width: 60 cm Discharge height: 180 cm

Insulated chimney made of stainless steel, acid-resistant, 7.50 m

Length 7.50 m Outer diameter 370 mm Inner diameter 250 mm

Plate chain, transport

pitch 200 mm ( from pin axis to pin axis ) thickness of insert 10 mm width between inserts inner 45 mm width between inserts outer 65 mm height of plate 60 mm We have about 80 mb

Buffers, hot water tanks, capacity 18,000 l

Buffer with a capacity of 18,000 liters Height 458 cm Wall thickness 6 mm Diameter without insulation 2500 mm Diameter with insulation 2900 mm Two hot water buffers, sealed, freshly dismantled due to replacement ...

Viessmann 720 KW oil furnace

Capacity 720 KW Year 1995