Used Materials Testing in Shandong, China

DX-400 Gauging Length Instrument of Tensile Specimen

• Manufacturer: JINAN LIANGONG TESTING TECHNOLOGY

1. Overview DX-400 Manual Tensile Specimen Gauge Length Meter is the specialized equipment which is designed and made according to national standard GB/T228-2010. Gauge length is correct, high-efficient and easy ...

Knife Edges for Extensometers

• Manufacturer: jinan testing equipment ie

Patent technology of TE: Auto calibration for load & extensometer

• Manufacturer: TE

TE electronic calibration module provides an easy way to calibrate load cell or extensometer and signal conditioning electronics without using a mechanical calibrator. It enables performing on-site electrical cal...

Patent technology of TE: Auto calibration for load & extensometer

• Manufacturer: jinan testing equipment ie

TE electronic calibration module provides an easy way to calibrate load cell or extensometer and signal conditioning electronics without using a mechanical calibrator. It enables performing on-site electrical cal...

Axial Extensometer-Model 3542

• Manufacturer: Epsilon Technology Corp

These extensometers are designed for testing a wide range of materials, including metals, plastics, composites and ceramics. All will work in both tension and compression. The dual flexure design makes them very ...

Bi-Axial or Axial Averaging Extensometers – Model 3560

• Manufacturer: Epsilon

This extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson’s ratio. The Model 3560BIA uses a design unique to E...

TE-UV2 Manual / Hydraulic

TE-UV2 Manual / Hydraulic Notch Cutter for Impact Specimen is specially designed for specimen preparation for impact specimen. Both manual type and hydraulic type are available to cutting the notch according to t...

High Temperature Clip-On Gages (700 °C) – Model 7641

These COD gages use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testing. The Model 7...

Circumferential Extensometers – Model 3544

Circumferential extensometers measure the change in circumference as the sample is compressed. This is considered by many researchers to be a more accurate way to determine diametral strain, since the measurement...

Bi-Axial or Axial Averaging Extensometers – Model 3560

• Manufacturer: Epsilon

This extensometer is ideally suited for testing anisotropic materials such as advanced composites as well as for general purpose tests like determining Poisson’s ratio. The Model 3560BIA uses a design unique to E...

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester

• Manufacturer: Vickers

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester Basic Structure Digital Micro Vickers Hardness Tester with Auto Turret HV-5MD HVS-M-AXYZF Auto Control, Measurement & Data Image Processing System Main Appli...

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester

• Manufacturer: Vickers

HVS-30M-AXYZF Fully Automatic Vickers Hardness Tester Basic Structure Digital Micro Vickers Hardness Tester with Auto Turret HV-5MD HVS-M-AXYZF Auto Control, Measurement & Data Image Processing System Main Appli...

HR-150A Rockwell Hardness Tester

• Manufacturer: Wilson Rockwell

Use HR-150A Rockwell hardness tester is the most popular Rockwell hardness tester, widely used to measure the Rockwell hardness of ferrous metals, non-ferrous metals, non-metallic materials, quenching and quenchi...

High Temperature Transverse Extensometers (700 °C) – Model 7675

These transverse extensometers use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials testi...

Long Gauge Length Axial Extensometers – Model 3542L

• Manufacturer: Epsilon

Long gauge length extensometers with gauge lengths greater than 2 inches (50 mm) for tensile and compression testing. These units have been specially designed for long gage length applications where low level str...