Used Reactors in Texas, USA

FUNDA R-10 M2-22-800-40 101033
- used
- Manufacturer: FUNDA
- Alloy: S
- Shell Material: 304SS
DRY CAKE DISCHARGE; WITH (22) FILTER SCREENS; FILTER TANK IS 3'8" DIAMETER X 7'6" STRAIGHT SIDE; 445 GALLON 107 CAPACITY; CLAMPED DISHED TOP; CONE BOTTOM; WITH 20 HP 3/60/230/460 VOLTS; 350 RPM TOP MOUNTED CENTRI...
Cleveland, TX
CONVERTERS 94203
- used
- Manufacturer: Struther Wells
- Alloy: C
MFG. BY STRUTHER WELLS; 2600 PSI DESIGN @ 475 DEG. F.; 84.125" INSIDE DIAMETER; 75'2.8125" OVERALL LENGTH; 4.125" SHELL THICKNESS; 3.125" HEAD THICKNESS; 19,135 GALLON WATER CAPACITY; WITH HALDOR TOPSOE BASKET;
Cleveland, TX
COLUMNS 99567
- used
- Manufacturer: PEMCO
- Alloy: S
MFG. BY PEMCO; PREVIOUSLY UTILIZED IN VITAMIN C PRODUCTION; LUG RING SUPPORT; 1/4" THICK SHELL AND HEADS;
Cleveland, TX
COLUMNS 103522
- used
- Manufacturer: Fabricated Products
- Alloy: S
MFG. BY FABRICATED PRODUCTS; 3/16" THICK SHELL; NOZZLES: TOP 16"; SHELL (2)3", 4", 6", 20"; BOTTOM 6";
Cleveland, TX
COLUMNS 103510
- used
- Manufacturer: Fabricated Products
- Alloy: S
MFG. BY FABRICATED PRODUCTS; 3/16" WALL THICKNESS; FLAT FLANGED TOP & DISHED BOTTOM;
Cleveland, TX
COLUMNS 103481
- used
- Manufacturer: Camden Alloy
- Alloy: S
MFG. BY CAMDEN ALLOY; Psi: ATMOS | Qty: 1 | Alloy: S | Gallons: 1017 | Material: 316LSS | Packed y/n: N | Temp deg. f: 230 | No. of trays: 12 | Full vacuum y/n: N | Length (ft'in"): 18'10" | Previous service: ETH...
Cleveland, TX
COLUMNS 93264
- used
- Manufacturer: Industrial Alloy
- Alloy: S
MFG. BY INDUSTRIAL ALLOY IN 1985; 1/4" WALL THICKNESS; LUG RING SUPPORTS;
Cleveland, TX
COLUMNS 88387
- used
- Manufacturer: Futura
- Alloy: A
MFG. BY FUTURA IN 1983; 6 BOLDED SECTIONS; LUG SUPPORTED; 14" X 53'7.25"; SHELL THICKNESS .1875";
Cleveland, TX
COLUMNS 100702
- used
- Manufacturer: Precision Stainless
- Alloy: S
MFG. BY PRECISION STAINLESS IN 1989; 4'0" CONE BOTTOM; LUG SUPPORTS; 1/4" WALL THICKNESS;
Cleveland, TX
DURIRON 24-VH-22 108367
- used
- Manufacturer: Duriron
- Alloy: S
- Shell Material: 316SS
PREVIOUSLY UTILIZED IN VITAMIN "C" PRODUCTION; LEG SUPPORTS; TOP DRIVE;
Cleveland, TX
COLUMNS 111830
- used
- Manufacturer: Praj Industries
- Alloy: S
This is an Unused RH-Grid trayed column. The column was built by Praj Industries in 2008. The column shell wall thickness is 0.315". The material is 304LSS with 304LSS trayx.
Cleveland, TX
COLUMNS 110594
- used
- Manufacturer: Ceramic Coatings
- Alloy: G
PREVIOUS SERVICE: 5-METHOXYMETHYL-2, 3-PYRIDINE DICARBOXYLIC ACID; S-22 COLUMN; MFG BY CERAMIC COATINGS; VERTICAL PACKED COLUMN; 3 CLAMPED SECTIONS; LUG MOUNTED;
Cleveland, TX
DURIRON 48" VH206FILTER 96022
- used
- Manufacturer: Duriron
- Alloy: S
- Shell Material: 304SS
3" INLET; 3" OUTLET; WITH INTERNAL ROTATING PLATES; 2" TOP SLUICER; 25.8 CUBIC FEET WITH 1 1/2" CAKE CAPACITY; 2 1/2" SPACING C TO C LEAVE SPACING; 1/2 HP DRIVE;
Cleveland, TX
SPARKLER 18-S-23 81029
- used
- Manufacturer: Sparkler
- Model: 18-S-23
- Alloy: S
- Shell Material: 304SS
REQUIRES INTERNALS; Qty: 1 | Alloy: S | Sq.ft.: 37 | Shell material: 304SS | Psi: 75 | Full vacuum y/n: N | Temp. deg. f: 400 | Jacketed y/n: N | V/h shell/internal: V
Cleveland, TX
COLUMNS DBL DIA 103473
- used
- Manufacturer: IPSCO
- Alloy: S
MFG. BY IPSCO; ON LEGS; 1/4" WALL THICKNESS; BOTTOM HEAD IS JACKETED; 1/2" SCH 10 SPIRAL COIL (6) TURNS @ 3" PITCH; COIL 170 PSI @ 375 DEG. F; NOZZLES: TOP SHELL (2) 1/2", 3", 6", 8"; BOTTOM SHELL (2) 1/2", 1", ...
Cleveland, TX