Used Lathes in Texas, USA

1998 MAZAK INTEGREX 70 CNC LATHE
- used
- Manufacturer: Mazak
- Model: INTEGREX 70
- Spindle Bore: 6.5"
- Distance between Centers: 121"
Rapid Traverse Rate: X- Y-Z Axis 472, 315,590 IPM Coolant, Splash/Chip Guards, Spindle Chiller, Tooling (16 pieces), Overload Detection and Transform...
$159,500 USD
Get financing
Est. $3,002/mo
Houston, TX
Trusted Seller
Hercules - Ajax Engine Lathe
- used
- Manufacturer: Hercules
25'' (27'' Actual) swing over ways with gap bed. 120'' Distance between centers 16 Spindle speeds (8-800 RPM) Threading (Metric) 4'' Spindle Hole Taper attachment Tool Post Steady Rest Chuck Hardened Way...
Texas, USA
Trusted Seller
20.1" X 20.7" Doosan CNC Lathe Model Lynx 220 LC New 2014
- used
- Manufacturer: Doosan
- Model: LYNX 220LC
Navasota, TX
Trusted Seller
2013 MAZAK QUICK TURN NEXUS 450, MODEL QTN 450-II CNC LATHE WITH 120" CENTERS AND 7" BAR CAPACITY
- used
- Manufacturer: Mazak
- Model: QUICK TURN NEXUS 450-II
Houston, TX
2000 MAZAK PMC CNC LATHE Oil Country Pipe threader
- used
- Manufacturer: Mazak
- Model: POWER MASTER CHUCKER
- Spindle Bore: 14”
MAZAK PMC CNC LATHE Chucks These lathes were running U.S. Steel Premium when purchased. Since then we have Completely disassembled them and gone thru them thoroughly. New seals if leaking, new O-rings As requir...
$550,000 USD
Houston, TX
2022 DMG Mori SL603BMC/4000 CNC Lathe
- used
- Manufacturer: DMG Mori
- Model: SL 603
2022 DMG Mori SL603BMC/4000 CNC Lathe, Equipped with: Live Milling, F32iB Control, 28" 3 Jaw Manual Front Chuck, 21" 3 Jaw Manual REAR Chuck, 7.3" Thru Hole, (2) RIP Manual Steady Rests, L&S Mist Collector, 299 C...
Fort Worth, TX
Trusted Seller
1980 Clausing 15"x50" Engine Lathe
- used
- Manufacturer: Clausing
- Distance between Centers: 50"
- Spindle Nose: D1-6 Camlock / 2.125" / 2"
Tool Post Tailstock 12" 3 Jaw Chuck Work Light Chuck size: 12" 3-Jaw | Maximum swing over bed: 15.7" | Maximum swing over cross slide: 9.7" | Distance between centers: 50" | Spindle nose / bore / bar capacity:...
Texas, USA
2009 Mazak QTN 350II MY x 60" Multi-Tasking CNC Lathe
- used
- Manufacturer: Mazak
- Model: QUICK TURN NEXUS 350-II MY
- Spindle Bore: 4.4"
EQUIPPED WITH: - Mazatrol Nexus Control - 12" 3-Jaw Chk with 4" Bar cap - Tapping / Boring Tornado - 3-H Live Holders, 3-Turning Holders and 1-Boring Bar Holder - Auto Tool Length - Chip Conveyor - 213 PSI Hi-Po...
Conroe, TX
SHARP MANUAL LATHE
- used
- Manufacturer: Sharp
SHARP MANUAL LATHE Swing over bed: 30” | Center distance: 120” | Thru hole: 3.75” | Spindle speeds: 5-400 rpm. | Chuck: 25” 4-jaw | Gap bed: YES | Taper attachment: NO | Equipped with: Coolant tank/pump, steady r...
$13,500 USD
Get financing
Est. $265/mo
Houston, TX
MAZAK QTN 300 CNC LATHE
- used
- Manufacturer: Mazak
- Model: QUICK TURN NEXUS 300
- Spindle Bore: 2.7”
Mazak QTN 300 Nexus CNC lathe Cnc control: Mazatrol 640T Nexus | Tool eye: Yes | Swing over bed: 23” | Max turning diameter: 12” | Max machining length: 48” | Spindle speed: 3,300 rpm | Spindle motor: 35 hp. | Ch...
$59,500 USD
Get financing
Est. $1,120/mo
Houston, TX
MAZAK QT-35 CNC LATHE
- used
- Manufacturer: Mazak
- Model: QUICK TURN 35
- Spindle Bore: 6.5”
- Spindle Nose: A-11
We have air chucks which will fit this lathe We have multiple air chucks or hydraulic chucks that will fit this lathe. One could be installed at extra cost. Video link:
$22,500 USD
Get financing
Est. $423/mo
Houston, TX
MAZAK SLANT TURN 60N CNC LATHE
- used
- Manufacturer: Mazak
- Model: SLANT TURN 60N
- Spindle Bore: 10.2”
- Spindle Nose: A-2-15
Serial number/YOM SN: 153958/2002 EIA/ISO Input Function, Graphic Display, Chip Conveyor, 45’ Slant Bed Construction with Hardened and Ground Box Ways. MAZAK SLANT TURN 60N CNC LATHE
$249,500 USD
Get financing
Est. $4,696/mo
Houston, TX
AMERICAN PACEMAKER HEAVY-DUTY LATHE
- used
- Manufacturer: American
- Spindle Bore: 2.75”
Coolant Taper Attachment Subject to prior sale. Swing over ways: 32” | Center distance: 96” | Spindle speeds: 7-600rpm 18 speed ranges | Spindle bore: 2.75” | Chuck: 24” 4 jaw w/ 5” bore | Main motor: 30 HP | Equ...
$19,500 USD
Get financing
Est. $383/mo
Houston, TX
Trusted Seller
LODGE & SHIPLEY 12-3/4 HOLLOW SPINDLE LATHE W/ DUMORE TOOL POST GRINDER
- used
- Manufacturer: Dumore
LODGE AND SHIPLEY LATHE P/B: 10HP ELECTRIC MOTOR W/ DUMORE MODEL 8316 TOOL POST GRINDER W/ 11” TO 12” WHEEL DIAMETER, 3HP ELECTRIC MOTOR (NOTE: BUYER RESPONSIBLE FOR LOADOUT), -----------------------------------...
Odessa, TX
1996 Mazak Slant Turn 50 CNC Lathe
- used
- Manufacturer: Mazak
- Model: SLANT TURN 50NX/2000U
- Spindle Bore: 6.5”
- Distance between Centers: 80”
Dimensions: Main body: 8’ 4” W x 19’ L x 9’ H. Chip conveyor: 22/42” W x 16’ L x 6’ H. The lathe is in good working condition with everything operating. MAZAK ST50N/2000U CNC TURNING CENTER
$69,500 USD
Get financing
Est. $1,308/mo
Houston, TX
Mazak QTU-250 Lathe
- used
- Manufacturer: Mazak
- Model: QTU-250
Good condition Mazak QTU-250 Lathes manufactured in 2015. Located in USA and other countries. Click request price for more information.
USA