Building Filters
1996 Pressta Eisele PV 8
- Manufacturer: Eisele
- Model: PV 8
Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg
$3,994 USDGütersloh, Germany
2003 Elumatec DG 244
- Manufacturer: Elumatec
- Model: DG244
Max. sawing length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt angles between 45...
1999 Elumatec DG 79
- Manufacturer: Elumatec
- Model: DG79
Max. cutting length: 4,500 mm Max. saw blade diameter: 380 mm Manual positioning of the saw unit with hand crank and digital display Cutting area at 90°: 195 x 120 mm Cutting area at 45°: 135 x 120 mm Minimu...
2000 Elumatec DG 244
- Manufacturer: Elumatec
- Model: DG244
Max. sawing length: 6,000 mm Max. saw blade diameter: 550 mm E 550 control unit in mint condition 5 motor-controlled axes (length positioning and degree-accurate angle adjustment for tilting / swiveling on bot...
2001 Rotox KF 348
- Manufacturer: Rotox
- Model: KF 348
Rotatable support table between 0° and 180°, allowing 3-sided processing in one clamping 2 speeds, 6,000 or 12,000 revolutions per minute preselectable, allowing both steel and aluminum profiles to be processed ...
1996 Pressta Eisele AKF 200 ST
- Manufacturer: Eisele
Notching width: max. 200 mm Notching depth: 40 mm Profile height: max. 100 mm Vise clamping width: 100 mm Feed length: max. 500 mm Speed: 2,800 rpm Electric milling feed via foot switch Profile clamping vi...
$1,351 USDGütersloh, Germany- Trusted Seller
2006 URBAN SV 530 CNC CORNER CLEANER [WM-010510]
- Manufacturer: Urban
- Model: SV 530
URBAN SV 530 CNC Corner Cleaning Machine Fully automatic corner cleaning machine with inner corner cleaning and freely programmable CNC axis controller with transom/bar machining. The graphic visualization of the...
- Trusted Seller
Neckarsulm, Germany 
1996 Elumatec TS 161
- Manufacturer: Elumatec
- Model: TS 161
Max. saw blade diameter: 280 mm Pneumatic material feed via two-hand operation minimum quantity spraying Bevel cuts possible on both sides with detent points Roller conveyor and length stops on request
$3,406 USDGütersloh, Germany
2006 Pressta Eisele PV 2000
- Manufacturer: Eisele
- Model: PV 2000
Hydropneumatic operation Profile height: 200 mm below hold-down Max. punching height: 150 mm Abutment height: 150 mm Weight: approx. 400 kg
2006 Elumatec TS 161
- Manufacturer: Elumatec
- Model: TS 161
Max. saw blade diameter: 280 mm Pneumatic material clamps Rotatable table with locking points Minimum quantity spray device Suitable roller conveyors and length stops on request
$3,759 USDGütersloh, Germany
Emmegi 550 SCA
- Manufacturer: Emmegi
- Model: 550 SCA
Max. saw blade diameter: 550 mm Hydropneumatic saw blade feed via 2 hand controls Pneumatic material clamps Minimum quantity spray device Table can be rotated on both sides with locking points at 45° Roller ...
Pressta Eisele PV 8
- Manufacturer: Eisele
- Model: PV 8
Hydropneumatic operation Max. punching height: 90 mm Abutment stroke: 100 mm Punching stroke: 20 mm Pressing force: 30 kN Max. profile height: 100 mm Weight: approx. 280 kg Very good condition
$3,994 USDGütersloh, Germany
Rapid BSK
- Manufacturer: Rapid
- Model: BSK
Aluminium saw with a cutting length of up to 600 mm with hydropneumatic feed Adjustable angle between 45° and 90° Pneumatic material clamps suction Max. saw blade diameter: 500 mm
$4,581 USDGütersloh, Germany
1997 Emmegi 450 SCA
- Manufacturer: Emmegi
- Model: 450 SCA
Saw blade diameter: 450 mm Hydropneumatic saw blade feed via 2 hand controls Pneumatic material clamps Minimum quantity spray device Table can be rotated on both sides with locking points at 45° Weight: appr...