Used Processing in Wallonia, Belgium

Vertical screw conveyor, Ø 5500 mm

Able to work vertically It is carried by trapezoid without reducer It can be separated in the middle In very good condition

Core sand mixer VOGEL&SCHEMMANN, 120 l

• Manufacturer: Vogel

With an open gear wheel and a hand flap Driven by gearmotor

Double sand paperingmachine, Ø 1000mm, HEINRICH WEMHÖHNER

2 discs of 1000mm, 2 tables 1080 x 300 Outside dimensions: 1.35 x 1080, h. 1400mm | Motor: 5,5 kW, 715 rpm, 380/660 V, 12,2 A

Treatment ladle, ± 1000 kg

• Manufacturer: Senssenbrenner

With planetary gearbox Hopper in good condition Weight: 600 kg | Outside dimensions: 1650mm x 950mm, h. 2400mm | Inside dimensions: Ø 770mm, h. 1150mm (without concrete)

Pendulum cutter with cabinet, Ø 300mm

Pendulum cutter disc Ø 300mm / modifiable up to Ø 400 mm. Motor 7,5 kW, 400V Belt transmission

Shake-out grid AXMANN 900 x 900 x 600 mm

• Manufacturer: Axmann

On 8 springs, 2 belt driven Outside dimensions: 1000 x 950, h. 600 mm | Useful dimensions: 900 x 900 mm | Motor: 2,2 KW, 3 hp, 1420 rpm, 220/380 V

Shake-out grid 900 x 900 mm

With vibrating axle, drive over 2 belts, on 8 springs

Discharging belt EA 4200 mm x 620 mm

Gearboxmotor BAUER Dismantled above with chain, heavy execution with 16 rolls 750mm

Core sand mixer BADIE 50 l

Type: KSU50, weight: ± 200 kg With cover Useful content 50 l Without protection at the sand outlet

Discharging belt EA 3000mm x 650mm

Gearmotor BAUER at the side with chain, with 10 rollls of 750mm

Bottom pouring ladle UTARD, ± 3 t

Serial number: A479 Weight: 2170kg Outside dimensions: 1900mm x 1200mm, h. 2450mm Useful dimensions: Ø 1000mm, h. 1200mm

Bottom pouring ladle UTARD, 2,5 - 3 t

Bad gearbox Weight: 1970 kg | Outside dimensions: 1900mm x 1000mm, h. 2350mm | Useful dimensions: Ø 950mm, h. 1220mm

Screw compressor 22 kW, BAUER, 3,55 m³/min

Type: C30 Super Silent, serial number.: 096-0532 Year of construction: 1996, weight: ± 450 kg Air output Ø 40mm Pressure max 7 bar 14.188 working hours

1990 Screw compressor MEHRER 1,43 m³/min

Type  FX11-10, serial number: 3252 Outside dimensions: 700 mm x 650 mm, h. 1200 mm Motor: 11 kW, 400 V, 2910 rpm Max pressure: 10 bar Year of construction: 1990

Screw dosing with a little bunker

Gearbox motor with speed regulation Type G22 G02- 10- VO/ DK 84- 200V 3308, 0,55 kW, 220/380 V, 1420 t/min With small pneumatic vibrating on the cone Screw not closed Speed exit 133 until 19 rpm Continuously