Used Processing in Ontario, Canada

Inox stainless steel filter housing

• Manufacturer: Inox Industries

-Shipping dimensions: Height - 58" x Width - 32" x Length - 20" -Vessel, 100 PSI at 300 degree F - -20 degree F at 100 PSI -Built 2000 -Delta bar added on: FMD230-WB3F9EA4DWH

900 Litres stainless steel tank on 55" legs with wheels

-Comes with lid that opens 1/3 of the way back -Valve in the middle of the lid is 2" -Tilted flat bottom -Port on bottom is 1.5" -Tank dimensions: 34" tall x 46" wide, on 55" tall legs -Shipping dimensions are 92...

11,367 Litres Stainless Steel Horizontal Tank

-Shipping dimensions: Length 138” x Width 80” x Height 105” -Horizontal tank -Stainless steel -Food grade -6 Stationary legs: 29 1/4” height -Man hole on side -2 tank cleaners -Insulated -1420 Imperial gallons -H...

10,457 Liter SS Rectangular holding tank

-Tank Dimensions: 84.5" width x 118" length x 64" height -Shipping Dimensions: 90"width x 134" length x 71" height -Bottom port: 1.25" Drain at bottom -Stationary legs are 8" all around -Bottom: Flat -Top: Open -...

2,150 Liter Mixing kettle

-On four stationary legs that are 26” tall -Cone bottom with dimples -Jacketed -lid on top, half opens -SPX Lignin mixer clamp on on top -SS -Shipping dimensions: 115” tall x 68” diameter -Tank dimensions: 48” ta...

3,300 Litres dimpled jacketed stainless steel tank

-Shipping dimensions: Height 120" x Width 70" x Length 70" -Stationary legs are 34" -Lid on top that can be half opened -Has a mount for a top mount mixer -Vented grate at the top -Bottom port is 3" -Flat bottom,...

JVR Vacuum seal machine

• Manufacturer: JVR Industries, Inc

-Shipping dimensions: 20” length x 14” width x 17” height -110 Volts -6 Amps

7,384 Liter Stainless steel tank w/ cone bottom

-On 4 legs that stand 49” tall -Cone bottom with 2.5” drain -Tank dimensions 75” diameter x 102” tall -Stainless steel -1624 Imp gallons -1,950 U.S. Gallons -7,384 Liters

59 Litres small side mount cone bottom tank

-SS tank -Cone bottom with 2” drain -Two small supporting legs on back side 5” long -Removable lid -3 tri clamp ports on top, 1 threaded port -Shipping dimensions: 25” tall x 19” diameter -Tank dimensions: 18” di...

1,254 Litres flat bottom stainless-steel holding tank

-Diameter: 40" -Height: 60" -Port sizes: 1" -Flat bottom -Hinge lid -Total dimensions: Height 66" x Width 45.5" -Approximate weight: 600 lbs

31 Litres little jacketed tank

-Shipping dimensions: Height 42" x Width 22" x Length 25" -Stainless steel -Open top -On for legs with wheels -Cone bottom with drain port -12” top opening -Tank dimensions: 13” x 14.5” -Drain port sits 3.5” down...

Labconco Air Filter

• Manufacturer: Labconco

-Shipping dimensions: Height 9 1/2" x Width 12 1/2" x Length 29" -Serial number: 66100 -116 Volts -PH 1 -Cycle: 50/60 -16 AMP

IPTS Clamp-On Agitator

-Comes with Genesis AC motor speed control hybrid drive -Shaft diameter: 1" -Manufacturer: IPTS Inc -Model: RPO 1-Ratio: 5:1 -HP: 1.05 -Baldor Reliance Motor: HP: 0.33 -Volts: 230/460 -Amps: 1.6/ 0.8 -RPM: 1725 -...

2,150 Liter SS mix kettle

-On four stationary legs that are 26” tall -Cone bottom with dimples -jacketed -lid on top, half opens -ss -Shipping dimensions: 90” tall x 68” diameter -Tank dimensions: 48” tall x 59” diameter -valve on the bot...

Blower with Baldor Motor

• Manufacturer: Baldor - Reliance

-Shipping dimensions: length 15" x width 13" x height 21" -Inlet and Outlet: 1 3/4” -HP: 2.5 -208-230/450 Volts -3450 RPM -3 Phase -Thermally Protected