Used Processing in Bremen, Germany

920 Liter mobile storage tank, Aisi304

Volume: 920 liter | Lower bottom: torispherical bottom | Stand type: moveable on wheels | Diameter outside: 1.140 mm | Cylindrical height: 910 mm | Total height: 1.600 mm | Wall thickness lower bottom: 2.6 mm | ...

16000 liter heatable storage tank, Aisi304

remarks: Full pipe coil inside the tank (lower cylinder area) available

1000 liter horizontal pressure tank, Aisi304

• Manufacturer: Duotank

remarks: Plastic manhole cover; tanks are stackable (see photos)

15000 liter standing mixing vessel; Aisi304 with balde agitator

Volume: 15.000 liter | Lower bottom: torispherical bottom | Stand type: legs | Diameter outside: 2.300 mm | Cylindrical height: 2.700 mm | Total height: 4.350 mm | Manhole: in the upper bottom | Outlet: availabl...

13500 liter heat-/coolable mixing tank, Aisi304 with Oblique blade agitator

remarks: Halbschlange zur Heizung am Zylinder und am Boden und ein Rohrbündelwärmetauscher im Tank; wir können des Heizungmantels/Kühlmantels nicht garantieren; wir können der Rührwerke nicht garantieren

125000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Bartec Schwarte

remarks: Manhole cylinder 510/410 mm; cylinder wall thickness: lowest segment: 4 mm; 3 subsequent segments: 3 mm; top 3 segments: 2.5 mm

10589 liter heat-/coolable agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

max. allowable working overpressure (dj): 3.0 bar Temperature control cylinder (dj): half-coil temperature control bottom (dj): double jacket technical equipment: level indicator (without guarantee), spray ball, ...

60 liter mobile stainless steel 316 vessel

• Manufacturer: Bolz

remarks: Mobile frame made of stainless steel 304; diameter of hand hole approx. 145 mm; vessel without bottom outlet

810 liter heatable/coolable, insulated agitator tank made of stainless steel 304 with beam agitator

• Manufacturer: Behälter KG Bremen

max. allowable working temperature: 80 °C max. allowable working overpressure (dj): 2.0 bar max. allowable working temperature (dj): 80 °C Temperature control cylinder (dj): thermoplate temperature control bottom...

2500 liter stainless steel 316 agitator tank with propeller agitator

• Manufacturer: GIG GRILL & GROSSMANN

remarks: Manhole diameter approx. 460 mm; outlet probably DN 50 reduced to approx. 15 mm by flanged fitting; 2 dip pipes inside the tank

500 liter agitator tank, Aisi 316 with inclined blade agitator

• Manufacturer: Holvrieka

remarks: Outlet with bead and 2 connections, inner diameter approx. 60 mm; 3 plastic base plates; slight metallic discoloration inside

10000 liter insulated agitator tank, Aisi 304 with blades agitator

• Manufacturer: Thrun Maschinen- und Behälterbau

remarks: Smaller dents in the upper bottom and insulation jacket

4000 liter flat bottom storage tank, Aisi 304

• Manufacturer: Schwarz

remarks: Tanks slightly out of round; outlet is lower than tank bottom (note this during installation); sheet metal cutouts in the lid; nameplate only present on 2 tanks; 1 tank with ball valve (see photos)

60000 liter isolated storagetank, Aisi 304 with propelleragitator

• Manufacturer: Ahlborn

remarks: tank feet are spacers for the substructure/foundation. Small repair areas inside

60000 liter isolated agitatortank, Aisi 304 with Blade stirrer

Volume: 60.000 liter | Bottom: cone shaped bottom | Stand type: skirt support | Insulation: available | Diameter inside: 3.700 mm | Diameter outside: 3.880 mm | Total height: 9.200 mm | Manhole: in the cylinder ...