Used Drilling Rigs

1994 INGERSOLL RAND A300 AUGER DRILL RIG #7309Tb

• Manufacturer: Ingersoll Rand

Manufactured 1994, approx 9000 hours, mounted on 2007 International 4300 truck with approx 98,500 miles, 2 winches, 3L6 Moyno pump, slide base with cross slide head, probe hammer, cathead, toolboxes, under deck a...

2024 SOOSAN JD1400E-II

• Manufacturer: Soosan

2023 Year – JD1400EII Rock CommanderHandles a 14’ft lead rod and changes 12’ft thereafter. Carries 86’ft of drill steel onboard. New Features: Operator Comfort – Enlarged operators cabin with movable drill contro...

BUCYRUS ERIE 22W CABLE TOOL DRILL RIG #7315T

• Manufacturer: Bucyrus-Erie
• Model: 22W
• Mast Height: 12.192 meter

Mounted on 1979 Ford Louisville truck with gas engine, 6 cylinder Hercules gas deck engine, 2 rear manual jacks, fully tooled (3” and larger), sitting since 2019, does not run Price: $16,500 - Illinois BUCYRUS ER...

1999 CASAGRANDE B130 HYDRAULIC DRILL RIG #4684Tb

• Manufacturer: Casagrande

Configured for CFA and rotary, year 1999, Cat 3116T diesel engine (104kw), approx 27,000 hours, max torque 108 kNm, mounted on Cat 320 on Sempirana tracks. CFA: 1000mm max diameter, 17.5m (12m + 6m kelly extensio...

2014 INGERSOLL RAND T3W DRILL RIG #3363T

• Manufacturer: Ingersoll Rand
• Model: T3W
• Horsepower: 565 horsepower
• Hook load: 0.907184 tonne

Manufactured 2014, 1070/350 IR air compressor, approx. 3,300 original hours as of August 1, 2024, Cummins QSK15 deck engine, 40,000# pullback, hydraulic tensioning system, 25 gpm Bean water pump, mounted on 2015 ...

INGERSOLL-RAND ECM350

• Manufacturer: Ingersoll Rand
• Model: ECM-350
• Drilling depth: 4.356 meter
• Mast Height: 5.753 meter

2.5 – 3.5 Inch Class VL140 Drifter Comes with 3 Air Compressors This is a Complete Drill Package with 3 Ingersoll-Rand Portable Air Compressors

REEDRILL TAURUS XL DRILL RIG #10089T

• Manufacturer: Taurus
• Model: XL
• Gearbox type: Automatic
• Drilling depth: 24.384 meter

Built in 1990’s, track mounted, 80’ depth, 120” max bit diameter, 10” inner kelly bar, 12” outer kelly bar, Cummins engine, automatic transmission, 25,000 lb service winch, 280 degree extendable table, 144,000 ft...

2007 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

Montabert HC200A Drifter – ‘0’ hours on fresh service CAT Engine Set up for 60mm drill steel Onboard Air of 480 CFM @ 150 PSI 5500 total frame hours 2012 percussion hours w/ ‘0’ hours on new service. PRICED TO SE...

REICHDRILL C450 D11 CRAWER MOUNTED DRILL RIG #8193T

Built early 2000’s and recently rebuilt, 900/500 air compressor, Cat deck engine (2400 hours), 6500 frame hours, 75% undercarriage, 8.5’W x 11’H, Contact us for additionaldetailsof the rebuild PRICE: $370,000 REI...

2024 LTD 360 RHINO CABLE TOOL DRILL RIG #10685T

• Manufacturer: Rhino

Built 2024, includes 4” x 14’ drill stem, 500’ x 5/8” main line, 5” x 12’ bailer (new), 6” and 10” bits (new), hydraulic controls, auto feed for mainline Price: $95,000

1996 TOYO TCD928C

• Manufacturer: Toyo

2.5 – 3.5 Inch Class TOYO TH800C Hydraulic Drifter Powered By DEUTZ BF6L913 Diesel Engine This is a Mazda Toyo TCD918E Self Contained Hydraulic Drill Extendable Boom Onboard Sullivan air compressor – 160 CFM @ 15...

1998 GARDNER-DENVER 300

• Manufacturer: Gardner Denver

3.5” – 4.5” Inch Class CAT 3126 Diesel Engine Self-Contained Hydraulic Drill HPR1H Hydraulic Drifter New Injection Pump 2017 Handles a 20’ft starter steel Set up for T45 Low frame Hours Extendable Boom Dust Colle...

1998 REEDRILL 300

• Manufacturer: Reedrill

3.5” – 4.5” Inch Class CAT 3126 Diesel Engine Self-Contained Hydraulic Drill HPR1H Hydraulic Drifter New Injection Pump 2017 Handles a 20’ft starter steel Set up for T45 Low frame Hours Extendable Boom Dust Colle...

SOOSAN JD1400E

• Manufacturer: Soosan

2017 Year – Junjin Soosan JD1400E serial # 67 – Rock Commander Unit has approx.. 6,552 total hours & 2,123 percussion hours.YH135 Drifter, 400 CFM @ 150 PSI onboard GHH-Rand Air Compressor, Rod Changer, Dust Coll...

2003 SANDVIK D55SP

• Manufacturer: Sandvik

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

Tamrock CHA1000 Drilling Rig

• Manufacturer: Tamrock
• Model: CHA1000

Good condition Tamrock CHA1000 Drilling Rigs manufactured in 1987. Located in USA and other countries. Click request price for more information.