Used Lathes in Hesse, Germany

Vierbackenfutter

Additional Information Very well-preserved used four-jaw chuck with short taper flange DIN 55027, size 8 Accessories Outwardly stepped jaws only (counter jaws missing), chuck key Further Information

1976 HERMANN WERNER MEK 4-100

• Manufacturer: Hermann

1 used, very well preserved profilator, made by HERMANN WERNER, Wuppertal, type MEK 4-100, serial number 40 127 76, built in 1976 with 2 machining systems, namely: a) Profiles with run-out radii, bevels .s-0 s...

1971 VÖEST DA 300/2000

• Manufacturer: Voestalpine
• Spindle bore: 83 mm

Additional equipment: Complete electrical equipment, three-jaw chuck 400 mm Ø, ditto RÖHM 310 mm Ø; four-jaw chuck 300 mm Ø, faceplate, IDEAL quick-change tool post with 6 inserts, live center, MT 5 reducing slee...

2021 MAZAK INTEGREX e-500 H

• Manufacturer: Mazak
• Model: INTEGREX E-500H

Machine model: Mazak Integrex e 500 H x 3000 | Control: Smooth X | Max. turning diameter: 820 mm | Max. turning length: 3.000 mm | Traverse: X-axis: 820 mm Y-axis: 500 mm Z-axis: 3,122 mm Tailstock: 2,990 mm B-a...

2007 MAZAK INTEGREX 200-IVST

• Manufacturer: Mazak
• Model: INTEGREX 200 IV ST

Control: Mazatrol matrix | Max. turning diameter: 660 mm | Max. turning length: 1.495 mm | Traverse: X-axis: 580 mm Y-axis: 150 mm Z-axis: 1,545 mm W-axis: 1,490 mm B-axis -30 to 210° | Rapid traverse: X/Y/Z/W 5...

2001 MAZAK INTEGREX 200 SY + GL100C

• Manufacturer: Mazak
• Model: INTEGREX 200SY

Control: Mazatrol 640 MT | Max. turning diameter: 540 mm | Max. turning length: 1.065 mm | Main spindle: Max. spindle speed 5,000 rpm | Against spindle: Max. spindle speed 6,000 rpm | Milling spindle: max. spind...

2018 MAZAK HQR-250 MSY (850U)

• Manufacturer: Mazak
• Model: HQR-250MSY/850U

Control: Smooth G | Traverse: X1/X2 axis: 207/141 mm Y1/Y2 axis: 100/70 mm Z1/Z2 axis: 760/815 mm W-axis: 865 mm | Max. turning diameter (upper turret): 344 mm | Max. turning diameter (lower turret): 210 mm | Ma...

SCHUNK ROTA-S Plus

• Manufacturer: Schunk
• Model: ROTA-S PLUS

Outer diameter: 200 mm Bore: 52 mm max. speed: 4500 rpm

Faceplate BILSING

• Manufacturer: BILSING

Faceplate diameter: 300 mm Bore: 80 mm Mounting taper short taper according to DIN 55027: size 6 Faceplate width: 80 mm

Hard base with screwed-on aluminum jaws

Accessory 5 hard base jaws with screwed-on aluminum jaws, suitable for a FORKARDT chuck, 250 mm Ø Further information

RÖHM 300

• Manufacturer: Röhm

Additional Information Used four-jaw chuck with spiral ring and centrically clamping, individually adjustable reversible jaws (No. 654) Accessories Chuck flange according to DIN 55027, size 8 Further Information

Vierbackenfutter

Additional information Used four-jaw chuck with chuck flange, short taper according to DIN 55027, size 8 Accessories Hard, outwardly stepped jaws, chuck key Further information

RÖHM 315

• Manufacturer: Röhm
• Model: 315

Additional Features Used three-jaw chuck with spiral ring and centrically clamping and individually adjustable reversible jaws, cast iron body Accessories Chuck flange according to DIN 55027, size 11 Further Info...

FORKARDT UVE 200-50/200

• Manufacturer: FORKARDT

Additional Used, well-maintained pneumatically operated three-jaw chuck Accessories Hard base and hard top jaws, pneumatic clamping device consisting of a maintenance unit, solenoid valve, and control panel with ...

HEIDENHEIN LS 688 C

• Manufacturer: HEIDENHEIN

Additional Used digital length scale Accessories Connection cable Further information