Used threading and tapping machine

Ridgid 300 T-2 Pipe Threader Threading Machine 811 Die. Works Great. #3
- Manufacturer: Ridgid
- Model: 300
Ridgid 300 T-2 Pipe Threader Threading Machine 811 Die. Works Great. This unit comes with two 811 dies 1/2-3/4 inch and 1-2 inch NPT.
$2,900 USD
New York, USA
Trusted Seller
National 6L4 with Pointer & Threader
- Manufacturer: National
- Model: 6L4
Byron, IL
Nutap GA-12 Bent Shank Single Spindle Nut Tapper
- Manufacturer: Nutap
MAXIMUM THREAD DIAMETER M-12 (1/2″) MAXIMUM PART DIAMETER 25MM MAXIMUM PART LENGTH DEPENDING ON PRODUCT – THREAD
Posen, IL
Jian Hwa – HRT13D – 2 Spindle Reversible Tapper
Model HRT-13 Tapping Size M3-M8 (1/8 – 5/16) Max Stroke (mm) 45 Max AC (mm) 18 Max Production Speed 70 (C) 90 (D) Main Power (KW) 0.75 (C) 1.5 (D) Main Power Comsumption (KW/h) 4.3 (C) 5.8 (D) Oil Tank (L) 120 Ma...
Posen, IL
Trusted Seller
1990 HARTFORD #30/40-180
- Manufacturer: Hartford
Capacity: 5/16" thru 5/8" Diameter | Maximum thread length: to 4-1/2" (at max Dia. 2") | Maximum shank length: 6" | Production rate: 90 to 180 PPM Standard #30 | Die pocket depth: 4-5/8" | Approx. floor size: 7...
Ivyland, PA
1012 National 4D Long Stroke Boltmaker
Original Specifications Maximum Cutoff Diameter – 5/8″ alloy steel Cutoff Diameter – 3/4″ mild steel Maximum Die Knockout – 9-5/8″ Maximum Die Knock Out when Trimming – 8″ PKO Stroke – 1-7/8″ Pieces per Minute – ...
Posen, IL
Auction
Lassy Model 12F Hand Tapper
Lassy Model 12F Hand Tapper
Chicago, IL
Visit Auction Website
Enkotec Type TA01 Thread Rolling Machine
capacity: up to 2,500 nails per minute nail length: 32-105mm (1-1/4″ – 4.1″) nail shank dia.: (intervals): 1.8-2.5mm (.071″-.098″), 2.3-3.4mm (.090″-.134″), 3.2-4.2mm (.126″-.165″) profile height (min.-max.): 27-...
Bristol, CT
Enkotec Type TA01 Thread Rolling Machine
capacity: up to 2,500 nails per minute nail length: 32-105mm (1-1/4″ – 4.1″) nail shank dia.: (intervals): 1.8-2.5mm (.071″-.098″), 2.3-3.4mm (.090″-.134″), 3.2-4.2mm (.126″-.165″) profile height (min.-max.): 27-...
Bristol, CT
Ridgid 300 T-2 Pipe Threader Threading Machine 811Die Oiler Works Great ET2
- Manufacturer: Ridgid
- Model: 300
$3,000 USD
New York, USA
Trusted Seller
HARTFORD 312
- Manufacturer: Hartford
- Model: 312
Production: 33 - 150PPM | Screw diameter capacity: No. 6 ( .138 ) through 5/16" | Thread length capacity: 1/8" - 2-1/2" | Approx. floor size: 4' x 6' | Approx. weight: 4,750 lbs. | Die pocket depth: 2-5/8" | Equ...
Ivyland, PA
Nutap MAS14 Nut Tapper
- Manufacturer: Nutap
M6 – M14 1/4″ to 1/2″ Weight: 3500 lbs | Dimensions: 45 × 44 × 67 in
Posen, IL
Trusted Seller
WATERBURY FARREL #20
- Manufacturer: Waterbury Farrel
- Model: 20
- Threading length: 127 millimeter
Maximum thread diameter: 3/8" | Maximum thread length: 5" | Maximum speed: 60 SPM | Approx. weight: 5,000 lbs | Equipped with: With Adjustable PitmanSpecial 5" Deep Die PocketSet For Wire Feed - Can Be Removed
Ivyland, PA
Trusted Seller
TSUGAMI R15A
- Manufacturer: Tsugami
- Model: R15A
- Threading length: 150 millimeter
Maximum rolling force: 15 TON (M) | Maximum rolling capacity infeed: 75mm | Maximum thread length (infeed): 150mm | Spindle diameter: 54mm | Spindle speeds: (4 Step) 20, 36,58, 82 RPM | Max thread pitch: 5mm | S...
Ivyland, PA
Trusted Seller
HARTFORD 20-225
- Manufacturer: Hartford
- Model: 20-225
- Threading length: 76.19999999999999 millimeter
Screw diameter capacity: 1/4" thru 1/2" | Maximum thread length: to 3" | Thread length at max. diameter: 1-1/2" | Maximum shank length: 4" | Production rate: 135 - 225 PPM | Die pocket depth: 3-1/8" | Flat die s...
Ivyland, PA