Used Forging in Belgium

ZM Duplex forging 60 kg

• Manufacturer: ZM Duplex forging

Max opening: 300 mm Piston diameter: 250 mm Table: 600 x 400 mm Features a horizontal piston a vertical piston

Bêché forging hammer 2040 kgm

• Manufacturer: Bêché forging hammer

Type: L9 Anvil weight: 750 kg Blow energy/punching power: 2040 kgm 100 automatic blows per minute Depth of throat: 575 mm Motorpower: 80 HP length: 3200 mm Width: 1450 mm Height: 3450 mm Weight: 33 ton

Imac Forging 750 ton

• Manufacturer: Imac

High Speed hydraulic Die Forging Press Capacity: 750 Ton New/ Unused, machine was never mounted... Stroke: 400 Max. opening: 810 Between coloms: 500 Table: 900 x 500 Power: 75 kW dimensions: 2800 x 2600 x 425...

Bêché forging hammer 400 kg

• Manufacturer: Bêché

Type L7 diameter van de hamer: 300 mm snelheid: 125 slagen per minuut slagenergie: 1040 kpm maximaal open: 530 mm keeldiepte: 520 mm tafelafmetingen: 265 x 100 mm afmetingen: 2500 x 1350 x 2900 mm totaalgewicht: ...

Massey forging hammer 1530 kgm

• Manufacturer: Massey

Type: 1.5 Blow energy: 1530 kgm Capacity: 580 kg Stroke: 685 mm 110 automatic blows per minute Diameter of ram: 320 mm Depth of throat: 650 mm Base plate: 2535 x 1455 mm Motor rating: 45 kW / 60 HP Total weight: ...

Pouring ladle ACETARC 1t

• Manufacturer: ACETARC

External dimensions: Length: 1600 mm; Width: 900 mm; Height: 1550 mm Usable dimensions: Ø730 mm; Depth: ±750 mm

Treatment ladle ACETARC 500kg

• Manufacturer: ACETARC

External dimensions: Length: 1400 mm; Width: 700 mm; Height: 2000 mm Usable dimensions: Ø550 mm; Depth: 1120 mm avec Refractory

2011 Crucible handling ladle FOUNDRY SERVICE 200kg

• Manufacturer: Foundry Service

Dimensions: Length: 900mm; width: 1600mm; height: 1100mm Useful dimensions: Ø620mm; depth: 560mm Without gearbox, pouring by hand With CE

Casting ladle MOZER 600kg

• Manufacturer: MOZER

Overhauled by Foundry service in 2012 Dimensions: Length: 1500; Width: 950mm; Height: 1250mm Useful dimensions: Ø590mm; Depth: 640mm Planetary gearbox With 2 pouring spouts

Casting ladle MARX 600kg

• Manufacturer: MARX

Dimensions: Length: 1500; Width: 950mm; Height: 1450mm Usable dimensions: Ø630mm; Depth: 620mm With 2 pouring spouts

Pouring ladle ±850kg

Poche de coulée avec réducteur à vis sans fin Dimensions extérieures : longueur : 1400 mm ; largeur : 950 mm ; hauteur : 1400 mm Dimensions utiles : Ø720 mm ; profondeur : ±740 mm

2017 Core shooter KLANN 5l; Hotbox

• Manufacturer: KLANN

Machine completely hydraulic Dimensions: Length: 3800mm / 4650mm (incl. belt); Width: 1500mm; Height: 2500mm Incl discharge belt Belt width: 500mm; belt length: 1850mm, height from floor: 800mm Heating jaw dimens...

1983 Low pressure casting machine KWC / INDUGA

• Manufacturer: KWC / INDUGA

Dimensions: Length: 6300mm; Width: 4650mm; Height: 1890mm Holding (35kW) and melting (105kW) possible Channel furnace INDUGA with 3 inductors Capacity: 11800kg; Melting capacity: 250kg/h With hydraulic unit RACIN...