Used controllers

NEW gassing units LÜBER, type LW-FDA 825i

• Manufacturer: Lüber
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

NEW gassing units LÜBER, type LW-FDA 825

• Manufacturer: Lüber
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

Semi-automatic moulding line HWS / HSP 2

50 complete moulds on the plant 4 pouring and cooling lines (partly motorized) 1 mould return line with 3 turnings stations2 transfer carriages 1 mobile push-out station Remolding by hand with chain hoist SIEMENS...

Core sand batch mixer, ± 80 l, BOTON-MERLET

Type: BM 80 EL, serial number: 870-567 Motor BONFIGLIOLI, 3 kW, 1410 rpm, 230/400 V Exit 280 mm, height 190 mm, mixer with 3 arms With senor for door closing With pneumatic valve With electric control cabinet, M...

Sand conveyor STEIN 125 l

Type: SAP-PL, serial number: 148-1082 Year of construction: 1982, Weight: ± 180 kg Input 220 x 220 mm Exit Ø 80mm Pressure max 6 bar With pneumatic valve on the inlet With pressure control equipment With sensor W...

Automated core shooter RÖPER H5

• Manufacturer: Laempe / Röperwerk

Largest core box dimensions: width 460 mm, depth ± 500 mm, height 400 mm with vacuum pump and gas flushing plate With complete housing, core discharge plate, suction pipes, with hydraulic side clamping and hydra...

2008 Core Shooter RÖPER FCS 25 HV-K

• Manufacturer: Laempe / Röperwerk

Dimensions of core boxe vertical: 800 x 530 x max. height 750mm Wuth hydraulic unit, power 37 kW With electric control PLC SIEMENS S7-300 With 2x shot heads Table povement by gear motor and frequency converter Ga...

1980 Green sand mixer EIRICH EBG4, with turbine

• Manufacturer: Eirich

Construction year: 1980, weight: ± 2000 kg Gear motor 19 kW, 380 V Mixer capacity ± 375 l, output ± 7,5 t/h/turbine Gear motor for mix cup turning 4 kW, 380 V, 125 rpm Motor outlet flap 0,75 kW With control relay...

Furan sand mixer ±4-5t/h OMEGA

• Manufacturer: Omega

Mixing arm movable With 3 daily hoppers, 1m³ each With 1 dosing screw With 2 roller conveyors; length: 2950mm; length: 4100mm With Mitsubishi D700 control unit ±12KW, 380V; 32A With 2 pumps Without steel construc...

1997 Moulding line BELLOI & ROMAGNOLI, 650 mm x 650 mm x 200/200 mm

Type: BRAP/4, construction year: 1997 Moulding line BELLOI & ROMAGNOLI hydraulic squeeze with rotating table With: - roller conveyors for return line (11 meters long) - roll-over (manual drive) - hydraulic statio...

NEW pneumatic sand conveyor FAT, S150 l

Type: S150-100, serial number: 5129 KOM N°: 18659 Weight: 295 kgDimensions: 1000 mm x 800 mm x 145 mmOutlet: Ø 80 mm inlet Ø 150 mmWith cone closure for side filling, 2 openingsControl voltage 230 VWith control...

Core sand mixer ±100l

Core sand mixer Dimensions: Length: 1200mm; Width: 1200mm; Height: 1000mm Useful dimensions: Ø700mm; height: 400mm Gear motor: SEW; Type: KF87DRN132M4 7,5kW; 290/500V; 1460rpm Pneumatic application flap Pneumatic...

Mixing plant for core sand LÜBER 2,5t/h

• Manufacturer: Lüber

3×400V; 50A; 50Hz; 22kW Core sand mixer on rails With 1 sand hopper with weighing system and 2 additive hoppers With 2 dosing valves With platform, railing and stairs With transfer car on KBK rail system ±35m KBK...

2007 Sand feeder 31 liters, KLEIN

External dimensions (as double item): 1400 mm x 1000 mm, h. 1600 mm External dimensions (single item): 550 mm x 550 mm, h 1600 mm Sandinlet Ø 145 mm Sandpipe Ø 100 mm With control valves Sends air from below and ...