Used controller

Transport and dosing worm screw, useful length 1000, Ø 150mm

Gearmotor LEROY SOMER, 1,1 kW, 910/33,3 rpm, 220/380 V Direct drive in line Inlet 140 x 140mm With control and drain cleaning cover under Ø 150mm Outlet Ø 150mm

Core Shotter RÖPER - SODIM Automat, 5 l

• Manufacturer: RÖPER -SODIM

Maximum dimensions of core boxes: width 340mm, depth 240mm, height 450mm With gassing plate Table movable to 4 directions With automatic clamping unit All mouvements by hydraulics With control Automat Telemecaniq...

Hotbox coreblower FM20

• Manufacturer: FMI

Dimension: Lenght: 1940mm; Width: 1000mm; Hight: 1750mm With 2 sides, With 2 sides pneumatic clamping strocke 2×200mm max width core box 345mm Control by automatic Toshiba E×40

Ladle heater, gas propane, SARGI

2 kW, 3 x 380 V With ventilator ±400 m³/h, 1 kW, 2900 rpm, 220/380 V Hi is e side ladle heater /pannel 1000x1000 mm. with control board and timer

2001 Core sand mixing plant LAEMPE SM5; 5,5t/h

• Manufacturer: Laempe / Röperwerk

Dimensions: Length: 2300mm; Width: 1200mm; Height: 2500mm Mixing bucket: Ø380mm; height: 600mm = ±65l With resin and hardener dosing Horizontal mixing paddleHorizontal cleaning paddleMotor power: 7,5KW Without el...

Mobile core sand mixer on rails SEGAB 120l

• Manufacturer: Segab

Dimensions: Mixer: Length: 2200mm; Width: 1000mm; Height: 1000mm Internal dimensions mixer: Ø700mm; depth: 450mm With loading station with hopper and sand cooler With SIEMENS S5 control unit Without dosing system...

Sand conveyor 170 l, R.DEBUS

Input Ø 210 mm, output Ø 100 mm, with pressure controller Filling system by cone, max. temperature 200°C, pressure 6 bar, content 170 l With compressed air accelerator on the bottom

Die casting cell (DGA 78) Bühler Evolution 120 DS

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, made by Striko Westofen, type Westomat 65 SL/ W 900 SL ProDos, year 2003, SN 7726, heating capacity 22 kW, capacity 620 dm³, furnace temperature max. 1,000° C, metal AL,...

Die casting cell (DGA 73) Bühler Evolution 53 D

• Manufacturer: Bühler

consisting of: Dosing/hot holding furnace, made by Stiko Westofen, type W 65 SL DG, year 1997, SN 5405, order no. AB 3171951, capacity 650 kg, furnace chamber volume 540 dm³, temperature max. 1,000° C, metal AL, ...

1973 Shell moulding machine SHALCO U900

External dimensions: length 3900 mm, width 1900 mm, height 2100 mm 700/13 rpm, 1410/27 rpm Without control panel With belt outlet With hydraulic unit (400 V, 15 kW)

Gassing unit BORDEN BETASET 10

External dimensions: 850 mm x 570 mm, h. 1500 mm; feet: 360 mm Three-phase motor 220 V With control box, emergency stop switch and heating, 3500 W; 220/380 V

Die casting cell (DGA 74) Bühler Evolution 53 D

• Manufacturer: Bühler

consisting of: Bühler, type Dataspeed, estimated BS 175,000; mold spraying machine, make Wollin, type PSM 3F, year 2018, control system, type PC2 Unidrive; 6-axis industrial robot, make ABB, type IRB 4600, year ...

Band grinder MAFAC KS 450-1

• Manufacturer: Mafac

Dimensions: Width: 640mm; Depth: 1520mm; Hight: 1050mm Table 190×140mm; Working hight: 770mm ( possibility with increase: +140mm) With relais control With motor broke and emergency stop Intake manifold Ø160/120mm...

Shake-out grid 3890mm x 3390mm

With eccentric axis, direct drive over cardan and progressif start With solid cone between shake-out grid and vibrating conveyor On 12 oscillating rubber elements Holes 55mm x 40mm With control board for the refe...

Double floor type grinder DÜRRRSCHMIDT-VITEX, 760 mm, 50 m/s

Motor CEM, type: MJPP180M14, serial number: 543154, 18,4 kW, 1430 rpm, 220/380 V Driving by belts, stone max. 760 mm, width 60 m With control cabinet, continious speed 50 m/s