Food & Beverage Processing » Brewing Equipment

Search By Manufacturer

Search By Country

Building Filters

10

Used inline

  • Trusted Seller
    Inline Filling Systems Cap Hopper/Elevator

    Inline Filling Systems Cap Hopper/Elevator

    • Manufacturer: In-Line

    Item is a used cap hopper/elevator manufactured by Inline Filling Systems. The discharge height is approximately 8 feet from the floor. The elevator belt has 9" wide flights that are 2 1/2' deep and 8 " apart on ...

    Portland, OR
  • Trusted Seller
    Inline Filling Systems 36" Rotary

    Inline Filling Systems 36" Rotary Dump/Feed Table (EXP. PROOF)

    • Manufacturer: In-Line

    Item is a used, Inline Filling Systems rotary accumulation disk w/ dump station platform. The machine is all S/S construction including frame and dump platform. The rotary disk is 36" diameter and equipped with d...

    Portland, OR
  • Trusted Seller
    Used GAI MODEL2008 – Semi-Automatic

    Used GAI MODEL2008 – Semi-Automatic 8 Spout Gravity Filler

    • Manufacturer: Gai

    Item is a GAI model2008 - 8 spout inline gravity filler- GRAVITY LINEAR FILLER 2008-CM Gravity linear filler composed of stainless steel. Output 640 liters/hour with 8 medium spouts 12.5 mm (.49 inches) This ...

    Portland, OR
  • Trusted Seller
    Used 10 bbl Mash Tun/

    Used 10 bbl Mash Tun/ Steeping Tank

    • Manufacturer: Agile Stainless

    (1) Available - Item is a used Agile Stainless 10 bbl insulated mash tun. The tank was built new in Portland, Oregon in 2022 at a cost of over $50,000!. It is designed as follows: 10 bbl Mash tun / steeping tank...

    Portland, OR
  • Trusted Seller
    Used 2020 Probrew Alchemator

    Used 2020 Probrew Alchemator

    • Manufacturer: Promach Probrew

    (1) Available - Used Promach Probrew Alchemator, 2020 - ProBrew Alchemator is an automated, inline alcohol separation system for breweries that uses membrane technology to pull water and alcohol out of fermented ...

    Portland, OR
  • Trusted Seller
    Auction
    Lot of Parts and Supplies

    Lot of Parts and Supplies on Shelf

      INLINE remote actuated valves, stainless sanitary parts fittings and valves, chain-disk parts, RANCO temp controller, etc. as shown

      Columbus, NE
      Visit Auction Website
    • Trusted Seller
      80 Ltr Gasquet DIATOP 1M

      80 Ltr Gasquet DIATOP 1M Stainless Steel Ground Filter Vessel

      • Manufacturer: Gasquet

      80 Ltr Gasquet DIATOP 1M Stainless Steel Ground Filter Vessel This is a Used Approx. 80 Ltr Gasquet DIATOP 1M Stainless Steel Ground Filter Vessel (Diatomaceous Earth Filter), which is suitable for the Production...

      Lockerbie, United Kingdom
    • Trusted Seller
      Moeschle 50 Barrel Brewery and

      Moeschle 50 Barrel Brewery and Fermeneters

      • Manufacturer: Moeschle

      Brewhouse: Moeschle stainless steel mash tun with stainless steel wedge wire floor (8 segments and 2 half moons), stainless steel sparge arm with jacket, insulation and 3 valves, capacity 6,800 litres (50 brewe...

      Retford, United Kingdom
    • Trusted Seller
      100 hl beer brewery with

      100 hl beer brewery with steam-heated brewhouse with stainless steel vessels 25-0213 25-0213

        Part No.: 25-0213 Condition: Used Quantity: 1 MJ UNI-VIER 100 hl brewhouse consisting of: Item No: 210218MW Crusher / milling system with 4-roller mill Item No: 210219MW 5-equipment brew house / steam-heated brew...

        Karlstadt am Main, Germany
      • Trusted Seller
        Techniblend Procarb Inline Carbonation System

        Techniblend Procarb Inline Carbonation System

        • Manufacturer: Techniblend

        Carbonator – Techniblend inline carbonator. Used consistently for 10+ years to carbonate sparkling wines and juices ranging from 1.0 to 5.5 volumes up to 60 bpm. The system was removed from service when the bottl...

        Portland, OR

      Overview

      Brewing equipment covers kettles, mash tuns, fermenters, bright tanks, heat exchangers, pumps, filters and full brewhouse systems used to make beer, cider and other fermented drinks. Options range from small pilot kits to large production systems, usually stainless steel and jacketed for temperature control. Buyers focus on capacity, vessel condition, instrumentation, CIP capability and sanitary design to ensure consistent batches and efficient cleaning.

      FAQ

      What should I inspect when buying used brewing equipment?

      Check vessel integrity (no pitting or cracks), sanitary welds, gaskets, valves, pumps, instrumentation, and control panels. Verify vessel volumes, presence of CIP ports, and review service or maintenance records.

      How should brewing equipment be prepared for shipping?

      Drain and clean tanks, remove loose components, secure agitators and fittings, protect sensors and glass, and crate or strap items to pallets. Use a transporter experienced with stainless tanks and provide lifting points and packing lists.

      What routine maintenance do brewing systems need?

      Regular CIP and sanitization, gasket and valve replacement, pump seal checks, calibration of probes, inspection of glycol jackets and welds, and periodic passivation of stainless steel if needed.

      Are inspections or certifications required before purchase?

      It’s wise to request pressure tests, electrical safety checks, and sanitary validation. Ensure equipment can meet local food safety and electrical codes and get documentation for any modifications.