Building Filters
- Trusted Seller
2025 JD Squared XR12 42' CNC Rotary Tube & Pipe Cutter
- Manufacturer: John Deere
Features: JD2 Motion Control PC Based Control Hypertherm Powermax 85 Sync Plasma Power Unit 10" Self-Centering 4-Jaw Chuck Beam Line Emulator, Base W-Axis Beam Line Emulator, X-Axis Tilt (A-Axis) Beam Line Emulat...
Melville, NY - Trusted SellerAuction
Inv.50054) John Deere 750C Dozer
- Manufacturer: John Deere
- Model: 750C
- Horsepower: 155 hp
- Transmission type: PowerShift
Model: 750C Hours: Approx 3000 Hrs Notes: Nice Clean Tight Dozer With All New Under Carriage, Computer Board Was Changed 1,000 Hours Ago, OROPS
Millersburg, OHVisit Auction Website - Trusted Seller
2005 John Deere 310SG
- Manufacturer: John Deere
- Model: 310SG
- Horsepower: 92 hp
- Hours: 5,700 h
2005 JOHN DEERE 310SG BACKHOE, CAB, HEAT, A/C, RADIO, 4x4, NEW TIRES, NEW PINS AND BUSHINGS, NEW COMPUTER , NEW COUPLE SENSORS, GREAT CONDITION
- Trusted Seller
2013 Deere 759JH
- Manufacturer: John Deere
- Model: 759JH
2013 759JH John Deere Harvester with Waratah 622B Head and new Cypress Gen 6 computer Please call with any questions, (410) 216-3949, Se Habla Español.
- Trusted Seller
2012 DEERE 643K
- Manufacturer: John Deere
- Model: 643K
- Operating weight: 22,000 kg
5600 Hours 28L Tires at 60% 22” Bunching Hot Saw Good running condition Tight and Dry FOB: NC
- Trusted Seller
2021 Deere 650K LGP
- Manufacturer: John Deere
- Model: 650K
- Horsepower: 104 hp
- Hours: 1,706 h
Only 1706 hours, Cab with air conditioning, Good undercarriage, PAT 6-way blade, Just servied at 1658 hrs, Ready to work!, $118,900 in Reidsville, NC
- Trusted Seller
2000 Deere 9400 with 4455 original hours
- Manufacturer: John Deere
- Hours: 4,455 h
Deere 9400 that was built in 2000, delivered in 2005, only 4455 hrs, A/C works, 78x45.33-33 tires at 60%, Transmission shifts good, Tight hitch, Runs great Comes with this pan: 2005 Deere 1810E - Bridgestone ti...
- Trusted Seller
JD SQUARED XR12
- Manufacturer: John Deere
JD SQUARED (USED) MODEL XR12 CNC ROTARY TUBE AND PIPE CUTTER 28.25" X-AXIS TRAVEL 11.5" Z-AXIS TRAVEL 1350"/MIN X-AXIS SPEED 1350"/MIN Y-AXIS SPEED 360"/MIN Z-AXIS SPEED ALL ETHERCAT BRUSHLESS SERVO MOTORS - YASK...
Dodge Center, MN - Trusted Seller
2005 Deere 1810E Pull Pan with 4455 hours
- Manufacturer: John Deere
- Model: 1810E
- Hours: 4,455 h
- Cutting width: 3.05 m
2005 Deere 1810E - with 4455 hours, Bridgestone tires 70%, 18 cubic yard rating, Functions just as it should. Comes with Deere 9400 that was built in 2000, delivered in 2005, only 4455 hrs, A/C works, 78x45.33-3...
- Trusted Seller
2024 Deere 30P - NEW and loaded
- Manufacturer: John Deere
- Hours: 3.9 h
2024 Deere 30P - Only 3.9 hours - 24 month 2000 hour full machine warranty until 10.21.26 - Cab with air - Deere hydraulic thumb - Deere 24” bucket - Manual coupler - Backfill blade - Rubber tracks - 23 HP Yanma...
- Trusted Seller
2021 Deere 135G
- Manufacturer: John Deere
- Model: 135G
- Hours: 3,971 h
- Operating weight: 13,888.99 kg
2021 Deere 135G 3971 hours One owner since new – utility contractor – NO clearing Deere Powertrain + Hydraulic warranty until April 27, 2026 or 5000 hours Deere service contract since new Rockland hydraulic ...
2012 John Deere 753J TRACK
- Manufacturer: John Deere
- Model: 753J
- Operating weight: 22,000 kg
2012 Deere 753J Feller Buncher, Equipped with a Quadco 22" 360 Degree Wrist. New Hydraulic Pump New Oil Pan and sealed Rear Main Seals. New Sprockets , Idler, New Rear Mains, New ECM Computer, Only 11,000 Hours, ...
Blakeslee, PA
2012 John Deere 703JH
- Manufacturer: John Deere
- Model: 703JH
2012 Deere 703JH Harvester, with Waratah HTH622B head,14,020 frame hours. Main saw motor resealed July 2021, new computer on head December 2021, Main seal on motor done December 2021, All new bushings on grab arm...
2007 John Deere 2054
- Manufacturer: John Deere
- Model: 2054
- Machine weight: 31,382.67 kg
2007 John Deere 2054 Harvester with Waratah 622B Head, 17,768 hours, Recent pump, Recent sprocket and rails, New Waratah computer, runs great. Weight 69,187 lbs Length 45 ft 0 in Width 11 ft 10 in Height 10 ft 10 in
- Trusted Seller
Hydraulic Thumb for John Deere JD220, JD230, JD270, JD790
- Manufacturer: John Deere
JMA HYDRAULIC MAIN PIN THUMB FIT 25 - 36 TONS EXCAVATOR OR SIMILAR MACHINE (PINS ARE INCLUDED) STOCK NUMBER (CAT325/330HYT90) ● MASTER MAIN PIN: 90 MM ● Brand: JMA ● Thumb Width: 33" Inches ● Thumb Length: 64"...