Used table type in Saxony, Germany

LORENZ SN4

• Manufacturer: Lorenz
• Model: SN4
• Wheel diameter: 180 millimeter

Wheel diameter - max.: 180 mm Tooth width - max.: 60 mm outside, 45 mm inside Module - max.: 4 Module - min.: 0.5 Stroke max.: 0 - 70 mm Stroke position adjustability: 88 mm Spindle mount inside: MT 4 Cutting whe...

2012 Injector sandblasting system with turntable #B16898

with 7 workpiece holding satellites Injector-cycle turntable blasting machine, sandblasting machine, blasting cabin, sandblasting machine used Material 12 mm steel Drive through rotary indexing table 7 workpiece ...

Hole punch ST022 #B15947

• Manufacturer: brand

Hole punch used pre-machining table approx. 600 mm 220/380 V The machine was used to punch holes approx. 2 mm in thin sheets. Changes and errors in the technical data, specifications and prices and subject to pri...

2011 Xenon Automatisierungstechnik GmbH FXS-M

• Manufacturer: Xenon Automatisierungstechnik GmbH

Solar film/module production line, module dimensions (LxW) max. 1300x900 mm, capacity 20 MW, consisting consisting of: 1) 4 "Epson" stringer systems, type G6-551SW, for placing the solar cells fed on the carrier ...

Hole punch PETS 0.5e #B14761

• Manufacturer: VEB Robotron Schreibmaschinenwerk

Hole punch for e.g. gaskets used table 280 x 280 mm distance to column approx. 45 mm drive SEW gear motor R302DT71D4 0,37 kW 171 rpm 220/380 V Subject to changes and errors in technical data, specifications and p...

2010 WMW-VEB ZFWZ 250/4 Retrofit

• Manufacturer: WMW
• Model: ZFWZ 250

Documentation: available Additional Information Max. workpiece diameter: 250 mm Module: 6 Year of manufacture: 1983 Table: 275 mm Axial travel: 275 mm Tangential travel: 100 mm Tooth helix angle: 45° Spindle spee...

2011 Mühlbauer SOL800T

• Manufacturer: Mühlbauer

Individual component from overall system Assembly/test line for contact hole punching, longitudinal cut, on 6 x 31 mm tape width, tape width 2x200 mm, 12x31 mm, tape length 3000 m, capacity 2x 10 MW, consisting ...

2004 SORALUCE SL 22 000

• Manufacturer: Soraluce
• Model: SL 22 000

Documentation: Additional Information Automatic indexing milling head Automatic tool clamping: Clamping force 15,000 N Indexing accuracy/repeatability: �� 3 sec. �� �� 0.002 mm Pull stud: DIN 69872 Form A Number ...

2005 Geibel & Hotz GmbH RS 600 CNC

• Manufacturer: Geibel & Hotz
• Model: RS 600 CNC

G+H precision external cylindrical grinding machine RS 600 CNC / P for machining multiple diameters in a single setup, in plunge or oscillating mode. Grinding table driven by a digital servo axis, ball screw with...

SOMET tool setting device

• Manufacturer: Somet

Tool presetter SOMET SPS 200 U 2x measuring units: FEINMESS DRESDEN Type: OFD FAE 4 Angle measuring system: MEOPTA Type: PMP 100 with base frame used, tested!

SOMET tool setting device

• Manufacturer: Somet

Tool presetter SOMET SPS 200 U 2x measuring units: FEINMESS DRESDEN Type: OFD FAE 4 Angle measuring system: MEOPTA Type: PMP 100 on base frame New! Preserved! Angle measuring system used!

SOMET tool setting device

• Manufacturer: Somet

Tool presetter, universal measuring stand, measuring stand SOMET TYPE 685062 Accessories - see ME742! Used, tested!

1988 STUDER Studer S20

• Manufacturer: Studer
• Model: S20

Without balancing stand but with balancing mandrel Internal grinding possible with some effort No CNC but with automatic system Min. outer diameter 2 mm max. 198 or 199 mm Center height: 100 mm Center width: 400 ...

1989 PRESSOTECHNIK GMBH PC 50.08

• Manufacturer: PRESSOTECHNIK GMBH

Manufacturer: PRESSOTECHNIK GMBH Type: PC 50.08 Year of manufacture 1989 Pressing force: 500 kN (50 t) Pneumohydraulic press, C-frame press used Dimensions approx. 1600 x 600 x 2050 mm Subject to changes and erro...