Used processing in Germany

2022 TITAN (PAMA) AFP 200

• Manufacturer: Pama
• Model: AFP200
• Spindle bore: 203.2 mm
• Power requirement: 144 kW

The horizontal drilling and milling machine is equipped with a support sleeve and movable stand. The AFP 200 is a robust boring mill with high stability and offers a wide range of application-specific solutions....

Processing Centers, NISSIN N-MAX-T50-APC, ID. A1043

• Manufacturer: NISSIN

NISSIN N-MAX-T50-APC used machine new (without putting in operation), in factory-owned lubrication The diameter of the table 630 mm The speed of the spindle 10,000 rpm The weight of the basic material 300 kg...

1967 STANKO 1A625

• Manufacturer: Stanko
• Model: 1A625
• Spindle bore: 60 mm
• Power requirement: 7 kW

Lathes with: - 4-position tool post - 3-jaw chuck 315mm - Centering point

1972 LINDNER LB 15 1116-000167

• Manufacturer: Lindner

Freight basis: Ex Stock Hamburg/Germany | Spindle taper: 20 / 30 / 40 MK | Type of control: conventional | Type of machine: Jig Boring Machine - Vertical | Storage location: Barsbüttel | Table surface area: 1100...

1983 Skoda W200 HC panel boring mill 20t part weight Equipment for wood and metal processing

• Manufacturer: Skoda
• Model: W200HC
• Spindle bore: 150 mm

plate boring mill plate boring mill Skoda W200 HC Drive power: 83 kW | Clamping table: 2500 x 2500 mm | Max. workpiece mass on table | workpiece mass: 20 t | Processing width on table | processing width on table:...

Clamping angle boring mill angle 2500mm high up to 60t part weight Equipment for wood and metal processing

several used clamping angle/boring mill angle 1500 to 1800mm wide 2500mm high 1250mm deep load capacity 60t 6 pieces available partly with stairs

WINTER horizontal and vertical drilling machine type MULTI MZ3x8

- Max. Center Distance Between Holes 2440(L)mm x 300(W) mm - Min. center distance between holes 220(L)mm x 32(W) mm - Max.process length 2440 mm - Min.process length 220 mm - Plate thickness 12~40 mm - Total numb...

MORSÖ - Miter and muntin punch model FC

-with foot control, -sliding longitudinal adjustment, -measuring scale, -stops adjustable 45°-90° to the left and right of the cutter head, -adjustable supports for folding profiles -with combination cutterhead (...

1978 Tos-Varnsdorf WHN 9B

• Manufacturer: TOS Varnsdorf
• Model: WHN 9
• Spindle bore: 110 mm

Tos-Varnsdorf WHN 9B used machine Type: WHN 9B Brand: Tos Varnsdorf Year of construction: 1978 X = 1250 mm Y = 900 mm Z = 1000 mm Dimensions: 12, 5T Recording: ISO 40 Good used condition. The machine ...

Multi-purpose boring, milling and drilling Machine, STANKO/SVERDLOV, 2627PMF4, ID. A1621

• Manufacturer: Stanko

2627PMF4-multi-purpose boring, milling and drilling Machine. Machines of the 2627pmf4 model are designed for processing large labor-intensive body parts Table working surface dimensions (mm) / table load cap...

MORSÖ - Mitre punch model F

: - Double miters 45° - Single miters, up to 90 - Working width, max. 100 mm - Working height, max. 160 mm - Cross section, max. 65/65 mm - Dimensional scale up to 1.500 mm - Net weight 90 kg For picture rails an...