Used Processing in Bremen, Germany

4500 liter heat-/coolable pressure tank, Aisi 316

max. allowable working temperature: 150 °C max. allowable working overpressure (dj): 6.0 bar max. allowable working temperature (dj): 150 °C Temperature control cylinder (dj): half-coil Technical documentation: d...

1200 liter heat-/ coolable tank, Aisi 304

Temperature control cylinder (dj): thermoplate temperature control bottom (dj): thermoplate material temperatur control system: AISI 304 (V2A) 1.4301

710 liter insulated pressure tank, Aisi 316

max. allowable working temperature: 130 °C Technical documentation: drawing,German Technical Supervisory Association TÜV documents remarks: Attention: outlet fitting extends beyond foot ends (former foot extensio...

500 liter tank, Aisi 304

remarks: Slight differences in the design of the tanks; tanks slightly out of round and with smaller dents; tanks do not have a bottom outlet; Feet partly slightly bent; One of the lids has 1 round sheet metal cu...

1000 liter tank, Aisi 304 with jet stream mixer

• Manufacturer: Ystral

remarks: Total height estimated (deviations possible); Agitator supports may need to be relined for installation; Diameter outlet end approx. 35 mm EX-proof: motor is ex-proof (compliance with the new ATEX direct...

2500 liter rectangular tank, Aisi 304

remarks: Basic dimensions inside: approx. 1,100 x 1,100 mm; Internal wall height: approx. 2,150 mm; light protective paint on the outside (no longer completely complete); Manhole diameter approx. 490 mm; slight d...

1000 liter IBC container, Aisi 304

remarks: Frame, Fe (galvanized; partly slightly bent); slight differences in design possible; Ball valve made of brass (nickel-plated); Diameter manhole approx. 420 mm (for 1 container the manhole is slightly pre...

68.000 liter pressure tank, Aisi 304

max. allowable working temperature: 20 °C Volume: 68.000 liter | Max. excess pressure: 2.2 bar | Stand type: welded suppert saddle | Total height: 2.880 mm | Total width: 2.730 mm | Total length: 14.000 mm | Manh...

570 liter heat-/coolable pressure tank, Aisi 304

Temperature control cylinder (dj): half-coil Technical documentation: drawing,various documents ,certificate of inspection material temperatur control system: AISI 304 (V2A) 1.4301

11800 liter tank, Aisi 304

remarks: With 1 tank, the cylinder is marbled on the outside

5000 liter tank, Aisi 304

remarks: Manhole approx. 320 x 420 mm; Tanks marbled on one side on the outside; the foot lengths on the individual tanks are slightly different (usually 1 foot is shorter than the other two feet; the feet would ...

10000 liter tank, Aisi 304

remarks: Manhole approx. 320 x 420 mm; Tanks marbled on one side on the outside; the foot lengths on the individual tanks are slightly different (usually 1 foot is shorter than the other two feet; the feet would ...

2400 liter heat-/coolable tank, Aisi 304

Temperature control cylinder (dj): double jacket remarks: Manhole approx. 345 x 455 mm; 1 dent in the insulation jacket (see photos) material temperatur control system: AISI 304 (V2A) 1.4301

300 liter mobile tank, Aisi 304

remarks: 1 strong dent in the upper cylinder area and 1 kink in the outlet pipe (see photos)

1000 liter pressure tank, Aisi 304

remarks: Tanks screwed into frame, Aisi 304; 1 hand hole diameter approx. 350 mm in the front base (hand hole cover made of plastic)