Building Filters
- Trusted Seller
Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM
used
- Manufacturer: Inductotherm
Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...
Amel, Belgium - Trusted Seller
EISENBANDSÄGE VERTIK.FUHO VELBERT 94
used
- Manufacturer: FUHO
- Weight: +/- 600 kg
Tiltable table 550 x 550 mm, max part height 400 mm, Infinitely variable speed
Amel, Belgium - Trusted Seller
Small band saw, brand FLOTT
used
- Manufacturer: Flott
- Motor: 0.45 kW, 680/1360 rpm, 380 V
tilting table In mint condition Cutting height: 160 mm | Cutting speed: 28 and 56 m/min | Motor: 0.45 kW, 680/1360 rpm, 380 V
Amel, Belgium - Trusted Seller
Chain hoist DEMAG PK5N-F 1000kg
used
- Manufacturer: Demag
- Model: PK5
220/380V; 1/0.25kW With hook Without plug and control bottle
Amel, Belgium - Trusted Seller
Chain hoist DEMAG PK10N-F 2000kg
used
- Manufacturer: Demag
- Model: PK10
220/380V; 1,5/0,35kW With hook WITHOUT plug and control
Amel, Belgium - Trusted Seller
Chain hoist DEMAG PK10N-F 2000kg
used
- Manufacturer: Demag
- Model: PK10
220/380V; 1,5/0,35kW With hook Load capacity: 2t (double girder) | 2 speeds: 1 /4 m/min | Lifting height: 2.8m
Amel, Belgium - Trusted Seller
Chain hoist DEMAG PK10N-F 1000kg
used
- Manufacturer: Demag
- Model: PK10
220/380V; 1,5/0,35kW With hook With plug and control bottle
Amel, Belgium - Trusted Seller
2000 Mobile hydraulic wedge station HOLMATRO
used
- Manufacturer: Holmatro
Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer
Amel, Belgium - Trusted Seller
2000 Mobile hydraulic wedge station HOLMATRO
used
- Manufacturer: Holmatro
Dimensions: Length: 800mm; Width: 400mm; Height: 1000mm Wedge dimensions: 800mm; Jaw length: 280mm 7.5kW, 3×400V; 1450rpm; 50Hz 20MPa With 1 wedge With spring balancer
Amel, Belgium - Trusted SellerAmel, Belgium
- Trusted Seller
2020 Pillar drilling machine EPPLE, GB50V
used
- Manufacturer: EPPLE
- Weight: 890 kg
With integrated cooling loquid pump and level vision With pivoting table gratudated and motorised lifting and hand crank, 580mm x 460mm, outreach 375mm With control box and emergency stop With drill protection Va...
Amel, Belgium - Trusted Seller
2022 Cupola filter with cooler GARANT 40.000m³/h
used
- Manufacturer: Garant
Filter system With discharge screw and motorised double flap With fan With GARANT gas cooler With cooler cleaning, 200Pa, 0.7kW With fresh air flap 1500mm x 350mm With hopper and motorised double flap and big bag...
Amel, Belgium - Trusted Seller
2009 Amine Gas Washer BGT, 9000 m³/h
used
- Manufacturer: BGT
Dimensions scrubber: Ø 1200mm; height: 7580mm (total: 10580mm) + chimney: Ø500mm height: 3000mm With solids separator With fan With control unit With collecting basin: Ø1600mm; height: 750mm
Amel, Belgium - Trusted Seller
2018 Mixing plant for core sand LORAMENDI 6t/h
used
- Manufacturer: Loramendi
Consisting of: -1 Sand bunker -1 Temperature control system 4.8t/h -1 Weighing hopper -1 Core sand mixer LORAMENDI; MDR1,5 150kg / filling; 90s mixing time / filling -2 Dosing tanks for resin and hardener -2 Tank...
Amel, Belgium - Trusted Seller
2018 Ladle heating station NORDIC FURNACES
used
- Manufacturer: Nordic Furnaces
1 used ladle lid and one brand new one With control board Fits perfectly on HWS casting ladles 2t
Amel, Belgium
