Used class c in Bavaria, Germany

CAT 314 C LCR Crawler Excavator (2007)

• Model: 314C LCR
• Horsepower: 90 horsepower

Specifications • Model: Caterpillar 314C LCR • Year of construction: 2007 • Operating hours: 10,470 h • Note: Hour counter was renewed at 5,356 h • Serial number: CAT0314CCSNY00364 • Weight class: approx. 15 tons...

MEMMERT UM200

• Manufacturer: Memmert
• Model: UM200

Incubator/drying oven UM 200. 220°C. 220V. 600W., inside dimensions 24x32x18 cm.14 liter, without shelf, class 1, very good condition,

Compact chiller 16-00112L 16-00112L

Cat. no.: 16-00112L Condition: New Units: 1 For wine and beer cooling Small, powerful, mobile APPLICATIONS Cooling or heating of must, wine and beerControl of fermentation temperatureWine stone stabilizationCool ...

KAESER SXC 8 screw compressor

• Manufacturer: Kaeser

Max. overpressure: 8 bar(g) Volume flow at 7.5 bar: 800 l/min Nominal power drive motor: 5.5 kW Efficiency class drive motor: IE3 Permissible pressure drop exhaust air duct: 20 Pa Warm air volume: 1,600 m³/h Requ...

ALZMETALL ALZTRONIC i14

• Manufacturer: Alzmetall
• Model: ALZTRONIC I14
• Throat depth: 190 millimeter
• Power requirement: 0.7 kilowatt

Standard equipment: 5″ TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drillin...

ALZMETALL ALZTRONIC i16

• Manufacturer: Alzmetall
• Model: ALZTRONIC I16
• Throat depth: 190 millimeter
• Power requirement: 0.7 kilowatt

Standard equipment: 5″ TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed displa...

ALZMETALL ALZTRONIC i12

• Manufacturer: Alzmetall
• Model: ALZTRONIC I12
• Throat depth: 200 millimeter
• Power requirement: 0.7 kilowatt

Standard equipment: 5″ TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drillin...

ALZMETALL ALZTRONIC i14

• Manufacturer: Alzmetall
• Model: ALZTRONIC I14
• Throat depth: 190 millimeter
• Power requirement: 0.7 kilowatt

Standard equipment: 5″ TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drillin...

ALZMETALL ALZTRONIC i16

• Manufacturer: Alzmetall
• Model: ALZTRONIC I16
• Throat depth: 190 millimeter
• Power requirement: 0.7 kilowatt

Standard equipment: 5″ TFT LCD display with touch function: Manual input of spindle speed setpoint, speed display actual value, integrated drilling depth display with touch function. setpoint, actual speed displa...

ALZMETALL ALZTRONIC i14

• Manufacturer: Alzmetall
• Model: ALZTRONIC I14
• Throat depth: 190 millimeter
• Power requirement: 0.7 kilowatt

Standard equipment: 5″ TFT LCD display with touch function: Manual input of spindle speed setpoint setpoint, actual speed display, integrated drilling depth display with touch zero point transfer, virtual drillin...

Plate filter Schenk type Niro 1000 17-00172L 17-00172L

• Manufacturer: Schenck

Cat. no.: 17-00172L Condition: Used Piece: 1 Plate filter Schenk type Niro 1000 Capacity: 10.000 liter/h for beer UNI-SCH-49-500 Factory No. 154 Type Niro 1000 Year of construction 1996 Operating pressure: 8 bar ...

2009 Delmag RH 28 rig.plus

• Manufacturer: Delmag
• Model: RH28
• Horsepower: 350.00676518823377 horsepower
• Drilling depth: 33 meter

Kelly K 495/3/33 RH 28 / SR 48 BT + CAT C9 261kW Tier 3 + BT 280-2 / 495 + Main winch 250kN + Auxiliary winch 75kN + Feeder 420/330kN

2020 Rotox SZA 268

• Manufacturer: Rotox

For sale is a steel cutting machine from ROTOX, type SZA268, built in 2020. The ROTOX SZA268 is an automatic sawing machine used for sawing rectangular steel tubes and steel profiles up to a wall thickness of 4 ...