Used cast

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

Jolt squeeze moulding machine BMD; ARPA 300

• Manufacturer: BMD

Dimensions: Width: 960mm; Deepth: 1400mm; Hight: 2230mm Tightening: 1300mm; Turning out: 220mm with pin lifting With emergency stop (pneumatic) capacity of tightening dynamic : 15T, static: 5T;

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 900 mm, width 570 mm, height 1180 mm Engine BAUER: 380 V; 0,5 CV; type: reducer drum speed 175 rpm/min in solid housing drive over 2 V-belts 2 outlets for separating

Small permanent drum magnet with drive

• Manufacturer: BMD

External dimensions: length 800 mm, width 620 mm, height 780 mm Engine OBERMOSER: 380 V; 0,5 CV, type: reducer drum speed ± 170 rpm/min in solid housing drive over chaine 2 outlets for separating

Moulding machine BMD ARPA1

Table 500 mm x 660 mm With jolts, press and removal from the mould successive Pression 4000 kg, vibrator 180 kg adjustable150/200/250 mm Foundation needed 275 mm Hand operated

Jolt squeeze moulding machine BMD ARPA700

With pin lifting Static forming pressure 11000 kg, dynamic 33 000 kg Mould dimensions: maximal 840 mm, 800 mm under floor (in put) Command panel completely pneumatic

Vibrating chut BMD, 2550 mm x 400 mm

2 vibrating motors 1460 rpm, 0,55 kW fixed at the side In good condition

Vibrating convoyer BMD, 5400×1100×1420mm

• Manufacturer: BMD

External dimensions: Length: 5400mm; Width: 1100mm; Height: 1420mm Useful dimensions: Length: 5350mm; Width: 300mm; Height: 200mm Motor: Brand: BMD; 2KW , 980r/min 220/380V vibation with 2 vibration motors On 4 f...

Vibrating conveyor 2000 mm x 1200 mm

• Manufacturer: BMD

External dimensions: length 2350 mm, width 1900 mm, height 1650 mm On frame, respectively on 6 silent blocs Centrifugal force 2 x 2900 N With penumatic tilted extension ± 300 mm

Vibrating convayor BMD 1260 mm x 550 mm

Motor FLOTTMANN, type: RUL800/14, 2 x 0.55 kW; 1420 rpm; 220/380 V

Vibrating chut BMD, uselful length 6250, Ø 350mm

Overall length 6500mm, overall width 850mm Useful length 6250mm, Ø 350mm With 2 vibrating motors VIMARC, each 0,55 Kw, 220/380 V In good condiiton

Vibrating conveyor BMD, 2600 mm x 860 mm x 200 mm

2 motors FEIGE, type V17110/4, 1,6 kW, 1440 rpm, 380 V Vibrating motors below the grid With 3 silent blocks on each foot The bottom of the conveyor is equipped with rubber Possibly suitable for tumble blast machine

Moulding machine BMD, type ARPA 300

Pressing capacity 15 000 kg Lifting by rollers Weight: ± 2600 kg | Dimensions: length 1100 mm, depth 1500 mm, height 2300 mm | With table: 960 mm x 580 mm | Pressing stroke: 130 mm | Lifting stroke: 220 mm | Jolt...

Vibrating conveyor, 3000 mm x 1000 mm

• Manufacturer: BMD

External Dimensions: length 3000 mm, width 1600 mm, hauteur 1750 mm on 4 feet, resp. on 4 springs Centrifugal force 2 x 2430 N Outlet height 1450 mm

1982 Shake-out conveyor BMD 4500mm x 1000mm

2 vibratingmotors Weight: 3500 kg