Used robotics in Spain

ABB IRB 1600iD IRC5 M2004 Multi move

• Manufacturer: ABB
• Model: IRB1600iD
• Load capacity: 4 kilogram
• no. of axis: 6 axis

ABB IRB 1600ID (Integrated Dressing) ABB IRB 1600ID (Integrated Dressing) robot model is designed for arc welding. The wiring situation and the process hoses are located inside the upper arm. Therefore, failures ...

ABB IRB 7600 IRC5 400 kg

• Manufacturer: ABB
• Model: IRB7600
• Load capacity: 400 kilogram
• no. of axis: 6 axis

Used ABB IRB 7600 Robotic Arm with IRC5 Controller, up to 400 kg Load The ABB IRB 7600 – 400/2.55 is a powerful manipulator designed for high-demand tasks. With a payload capacity of 400 kg and a reach of 2.55 me...

ABB ABB 3x IRB 1400 multimove IRC5

• Manufacturer: ABB
• Model: IRB1400
• Load capacity: 125 kilogram
• no. of axis: 6 axis

Welding system 3x IRB 1400 multimove IRC5 Max. load (kg): 5 | Arm reach (m): 1.44 | Axis: 6 | Repeatability (mm): 0.05 | Robot weight (kg): 225 | Mounting: Floor | Payload: 125 Kg | Maximum reach: 3500 mm | Repea...

2019 MEP MULTIRADIUS 36

• Manufacturer: MEP

MEP MULTIRADIUS 36 The MULTIRADIUS 36 BEND series forming and calendering centers allow the production of circles, stirrups, and shaped and calendered parts with right and left bends at both ends. Forming is full...

2004 OSCAM SMART FUTURA 2M

• Manufacturer: Oscam

OSCAM SMART FUTURA 2M Both mobile benders 7 bars 12mm 5 bars of 16 mm 4 bars 20mm 3 bars of 25 mm 1 bar 40 mm

MEP CS 40

• Manufacturer: MEP
• Model: CS40

MEP CS 40 Automatic installation with electronic programming for the production of stirrups and folds of medium and large dimensions, with bends on one or both ends. The CS 40 bending installations allow maximum ...

2004 SCHNELL ROBOMASTER 45/12 PL

• Manufacturer: Schnell

SCHNELL ROBOMASTER 45/12 PL Shaping centre with 2 bending units independently operated, one fixed and one mobile, automatic 4- directions bending for shapes with positive and negative bends, equipped with wide fe...

ABB ABB IRB 2400 – 16 IRC5

• Manufacturer: ABB
• Model: IRB2400
• Load capacity: 16 kilogram
• no. of axis: 6 axis

Used ABB IRB 2400 – 16 Robot with IRC5 control The IRB 2400 is one of the most widely used industrial robots across various industries due to its reliability and versatility. Equipped with the IRC5 M2004 controll...

2015 MURATEC MW20

• Manufacturer: Muratec
• Model: MW20

Double-head lathe with gantry robotThe maximum workpiece capacity with the robot is 200 mm diameter x 120 mm length and a maximum workpiece weight of 6 kg. The chucks are equipped with two x 200 mm plates in each...

RALC CTS CONNI CUTTING DEBURRING RALC LYBRA 450 + RALC SDB 100 – 5000

• Manufacturer: Conni

Complete LOADING, CUTTING & DEBURRING LINE & UNLOADING, manufactured by RALC CTS CONNI OPTIONAL : AUTOMATIC ROBOTIC BUNDLING SYSTEM in squares/hexagonal bundles, with exit carriage and safety areas Model RALC L...

Battery-powered autonomous robot for vacuuming and cleaning pools (new)

Battery-Powered Autonomous Pool Vacuuming and Cleaning Robot (New) This robot does not require power cords or drain lines. It cleans and vacuums the pool floor and walls, storing the vacuumed debris in an interna...