Used Processing in Wallonia, Belgium

Small permanent drum magnet with drive

• used

• Manufacturer: BMD

External dimensions: length 800 mm, width 620 mm, height 780 mm Engine OBERMOSER: 380 V; 0,5 CV, type: reducer drum speed ± 170 rpm/min in solid housing drive over chaine 2 outlets for separating

Thickness gauge ELCOMETER

• used

• Manufacturer: ELCOMETER 211

measuring range 1 - 1000 μm with pocket Weight: ± 1kg | Dimensions: length 210 mm, width 60 mm, height 30 mm

Furan sand screw mixer BORDEN, ± 5-10 t

• used

External dimensions: length 3400 mm, width 1250 mm, height 2200mm Between axe input and exit 1700 mm Ø of the tube 240 mm Comannd over automat TELEMECHANIK TSX2720 With pneumatic slide With sensor on the cover

2008 2 x Casting ladle 8 t FOUNDRY SERVICE

• used

Serial number 6067/10 + 6067/11Construction year: 2008Weight: ± 2,800 kgupper Vessel Ø 1630 mmbelow Vessel Ø 1530 mmVessel height 1340 mmTotal height 2390 mmTotal width 1834 mmWith planet gearbox RSD110VWith ladl...

Small sandhopper, ± 1 m³

• used

On 4 feet with overpressure valve Weight: ± 400 kg | Outside dimensions: 1530 mm x 1130 mm, h. 3500 mm | Useful dimensions: 1250 mm x 850 mm, 1450 mm | Outlet height above the ground: ± 1900 mm

Refrigerating air dryer Beko

• used

• Manufacturer: Beko
• Model: RA

Motor 230 V mono Air entry 1" Suitable for compressor ± 22 kW

Mobile motorized turntable, Ø ± 1500 mm, ± 10 t

• used

Outside height 520 mm, Ø 1500 mm Working disc Ø 1500 mm, out of wood Track gauge 60 mm, height 10 mm With cable roll-up device Table rotation manually

Mobile motorized turntable, Ø ± 1500 mm, ± 10 t

• used

Motor DEMAG, type KBF71B8/2, 430 rpm outlet, 380 V Working disc Ø 1500 mm, made out of wood Track gauge 60 mm, height 10 mm With cable roll-up device Table rotation manually

550 mm x 350 mm x 180 mm, 23 kg, rolled profile

• used

550 mm x 350 mm x 80 mm, 12 kg, rolled profile

• used

NEW gassing units LÜBER, type LW-FDA 825

• used

• Manufacturer: Lüber
• Model: LW-FDA 825

Outside depth 625 mm With heating 8 kW Max core weight 35 kg (± 25 l) With contactor control With stainless feeder tank 30 l Compressed air connector 1" (Ø 25 mm) With micro pump, gasdosing by rotameter Compresse...

725 mm x 640 mm x 310 mm, 170 kg

• used

With trunnion round or oval rings, Ø 25 mm

455 mm x 350 mm x 220 mm, 40 kg

• used

500 mm x 460 mm x 110 mm, 38 kg

• used

550 mm x 440 mm x 90/90mm (pairs), 28 kg

• used