Used Processing in Wallonia, Belgium

Trusted Seller
Moulding machine BMD, type ARPA 300
- used
Pressing capacity 15 000 kg Lifting by rollers Weight: ± 2600 kg | Dimensions: length 1100 mm, depth 1500 mm, height 2300 mm | With table: 960 mm x 580 mm | Pressing stroke: 130 mm | Lifting stroke: 220 mm | Jolt...
Amel, Belgium
Trusted Seller
Comrpessed air sprayer for coating, ± 40 l
- used
- Manufacturer: RHONA
External dimensions: length 600 mm, width 500 mm, height 960 mm Air inlet with pressure regulator, overpressure valve On 2 wheels With pressure gauge on the cover
Amel, Belgium
Trusted Seller
Black marble surface plate, 1200 mm x 800 mm
- used
- Manufacturer: OELZE
On substructure (steel) With 5 adjusting screws Make: OELZE | Weight: ± 500 kg | Dimensions: length 1200 mm, width 800 mm, height 840 mm
Amel, Belgium
Trusted Seller
1989 Fixed electric melting furnace HINDENLANG, 300 kg aluminium
- used
- Manufacturer: Hindenlang
Melting furnace for aluminium or brass Crucible typ BU 300 With pivoted cover With temperature sensors Advantage: the heating resistors can be changed from the outside without moving the crucible
Amel, Belgium
Trusted Seller
Freehand sandblast unit with dust filter
- used
- Manufacturer: STRAALTECHNIK
Dimensions: length 1650mm + 1300mm, width 1500mm + 1200mm, height 2970mm + 1150mm Sandblast barrel ± 150 l with ± 7 m blasting hose (pipe) and blast nozzle with suction cyclone (for 4 flexible hoses Ø 100mm for b...
Amel, Belgium
Trusted Seller
Steep conveyor 30 000 mm, useful width 1150mm
- used
External dimensions: length 32 850 mm, width 1360 mm, height 580 mm Motor: 0,75 kW, 220/380 V, type gear motor, 1,8 rpm at the outlet Feet adjustable in height Roller covered with rubber Transmission from the mot...
Amel, Belgium
Trusted Seller
Vibrating needle for beton with electric drive unit
- used
With cable of 10 m to the drive unit With 5 m in protection hose up to the needle
Amel, Belgium
Trusted Seller
Shaking device for ladles and furnaces, Ø 600 mm to 900 mm
- used
Small grantry crane to put on top of ladle or furnace equipped with electric winch, max. capacity 700 kg to move inside of the lining former on support plate with 3 pneumatic hammers
Amel, Belgium
Trusted Seller
Overband magnet STEINERT, 2,7 KW 900 mm x 750 mm
- used
- Manufacturer: Steinert
With transformer / rectifier and switch Weight: 2000 kg | Dimensions: length 2250 mm, width 1150 mm, height 900 mm | Motor: 2,2 kW, 220/380 V, make VDE, 1430 rpm | Magnet surface: 900 mm x 750 mm | Belt width: 80...
Amel, Belgium
Trusted Seller
Moulding boxes, 620 mm x 600 mm x 460 mm
- used
With trunions With bushings 4 clamping pins Weight: 110 kg/pc
Amel, Belgium
Trusted Seller
Hammer mill, 15 kW, with perforated bottom
- used
Motor: 15 kW, 220/380 V, make ABB, type MBUL 180 L4, 1445 rpm Drive over 6 V-belts 4 hammer ranges each with 8 hammers Width 310mm, Ø ± 400mm With interchargeable qualibration sieve bottom With small exhaust for ...
Amel, Belgium
Trusted Seller
2003 Dust filter AEROB, 2000 m³/h to 2500 m³/h, stainless steel
- used
- Manufacturer: AEROB / BG Filtration
With extraction socket, Ø 140mm With stainless steel filter housing Pneumatic filter cleaning Dust bucket Connection tubes and bows With silencer With exhaust on the floor next to the filter With CE sign With sta...
Amel, Belgium
Trusted Seller
Induction melting furnace INDUCTOTHERM, 250 kg
- used
- Manufacturer: Inductotherm
With 2 furnaces for alternativ working With transformer With hydraulic With cooling tower With water pump With control board
Amel, Belgium
Trusted Seller
1980 Moulding machine KÜNKEL WAGNER, APM.f1
- used
- Manufacturer: Künkel Wagner
Moulding machine without foundation With pneumatic drived head pivoting With pneumatic table vibrator
Amel, Belgium
Trusted Seller
Conical perforated stainless sheets for fluid beds
- used
Only on request Stainlees sheets Conidur with double conical perforation towards the length serve for dedusting of silica sand, e.g. for inserting air aerator and moving the sand forward These sheets are only mad...
Amel, Belgium