Used Processing in Ontario, Canada

7,384 Liter Stainless steel tank w/ cone bottom

-On 4 legs that stand 49” tall -Cone bottom with 2.5” drain -Tank dimensions 75” diameter x 102” tall -Stainless steel -1624 Imp gallons -1,950 U.S. Gallons -7,384 Liters

Small side mount cone bottom tank

-ss tank -Cone bottom with 2” drain -Two small supporting legs on back side 5” long -Removable lid -3 tri clamp ports on top, 1 threaded port -Shipping dimensions: 25” tall x 19” diameter -Tank dimensions: 18” di...

Flat Bottom Stainless-steel Holding Tank

-Diameter: 40" -Height: 60" -Port sizes: 1" -Flat bottom -Hinge lid -Total dimensions: Height 66" x Width 45.5" -Approximate weight: 600 lbs

900 Liter Tank with Mixer

-4 legs on wheels with brakes -flat bottom -stair access -SM-Cyclo mixer w/ reliance motor: .96 HP, 1750RPM -motor: 230/460 V, 1725 RPM -lid opens -304 stainless steel -Tank: 24" height x 54" diameter -198 Imp Ga...

6,694 Liter Dimple Jacketed Stainless Tank

-Capacity: 1474.46 Imperial gallons -1,769 U.S. Gallons -6,694 Liters -Inlet & outlet: 2" -Dimple jacketed -Coned bottom -Tri-clamp connections -Manhole on the side -Previously used at a brewery -Tank dimensions:...

24,578 Liter Poly tank

-Plastic flat bottom -Manhole on top -On ss frame base (dimensions: 22” tall x 103” wide x 103” long) -Small port at bottom 3” diameter -Tank dimensions: 130” diameter x 113” tall 9’ tall -5,406 Imp Gallons -6,49...

Poly Shelf

• Manufacturer: Enpac

-Enpac Poly Shelf -Shipping dimensions: 21 1/2" L x 17 1/2" W x 17 1/2" H

Zhongshan Multiweigh packaging machine

• Manufacturer: Zhongshan

-Shipping dimensions: H: 7’3” x L: 6’ x W: 6’ -Weight is 650 kg -Model JW-AM14 -Power: AC220V, 60HZ, 1PH, 20 AMPS -Weight range: 100-3000g -There is a mezzanine included with item

2,150 Liter SS mix kettle

-On four stationary legs that are 26” tall -Cone bottom with dimples -jacketed -lid on top, half opens -ss -Shipping dimensions: 90” tall x 68” diameter -Tank dimensions: 48” tall x 59” diameter -valve on the bot...

Sanitizer tank

-3 legs stand 4’ off the ground -3” spout at the bottom with a 2” off spout off that -Removable lid -Shipping dimensions: 115” tall 27” diameter -Tank dimensions: 24” die x 51” tall -Two Sight glasses on the side...

Stainless Square Tub

-Shipping dimensions: Height 40 1/2" x Width 40" x Length 71" -2 1/2" diameter drain -150 US Gallon

IPTS Clamp-On Agitator

-Comes with Genesis AC motor speed control hybrid drive -Shaft diameter: 1" -Manufacturer: IPTS Inc -Model: RPO 1-Ratio: 5:1 -HP: 1.05 -Baldor Reliance Motor: HP: 0.33 -Volts: 230/460 -Amps: 1.6/ 0.8 -RPM: 1725 -...

6,819 Liter Jacketed Stainless steel horizontal tank

-Dimensions of tank: Height 60" x Length 118.5" x Width 59" -Six ports on one side: one: 1", three: 3", two: 1.5", -On the other side there are three ports: two: 3", one: 2" -Two inspection hatches with lids on t...

2,687 Litres jacketed stainless steel tank

• Manufacturer: Paul Mueller Company

-There is a mount for mixer -Manhole on top is -Dome bottom -Port on bottom is with manual valve -Drain port on bottom is 3" -Stationary legs are 21" tall -Max W.P. 30 & F.V. PSI at 300 degree F

Neptune Side Mount Mixer

-0.750" shaft dia needed -Manufacturer: Neptune Mixer Co. -Model: JG-3.1 -Serial number: 117139 -RPM: 350 -Motor: Model: 60443, HP: 0.5, Volt: 575, Phase 3