Processing » Hiroshima

Building Filters

604

Used Processing in Hiroshima, Japan

［Yaskawa Electric Corporation] General-purpose motors
- used
- Manufacturer: Yaskawa - Motoman
Power: 22Kw4P200V | Material: SS | Quantity saved: 1
Hiroshima, Japan
Sumitomo CHHM3-6160DC-AV-121
- used
- Manufacturer: Sumitomo
2.2kw/4P/200V Deceleration ratio: 1/121 Power: 2.2kw/4P/200V | Material: SS | Quantity saved: 1
Hiroshima, Japan
Motor with cyclo reducer
- used
- Manufacturer: Daiichi Bussan Co.
Reduction ratio: 1/273 Shaft diameter φ120 Power: 11Kw (1800rpm) 200V
Hiroshima, Japan
Mitsubishi XE-NE
- used
- Manufacturer: Mitsubishi
0.4kw/200V d2G4, unused Power: 0.4kw | Quantity saved: 1
Hiroshima, Japan
1992 Tanabe CO-24
- used
- Manufacturer: Made by Tanabe
24-inch type, top discharge type, with manual brake
Kure, Japan
2010 G-TECH 1456/3 type
- used
- Manufacturer: G-TECH
Centrifugal effect: 3150G Left speed rotation: 4-48rpm Acceleration time: 2-3min Wetted parts: SUS316 Wear-resistant with 2 pumps. The product is made in Australia, but we provide full support. No operation panel
Kure, Japan
Hata Ironworks HU-RG
- used
- Manufacturer: Hata Ironworks
Main electric motor 0.75㎾ Built-in motor with stepless speed change Main unit weight: approx. 180 kg This is a dry type granulator that crushes tablets and other solids to make them into dependable granules. This...
Kure, Japan
1985 Matsumoto Kikai MARK III 48×36
- used
- Manufacturer: Matsumoto Machinery
Bottom discharge type Hydraulic system Hydraulic scraping device Main unit operation panel
Kure, Japan
Large machinery industry DSS-45-L
- used
- Manufacturer: Large machine industry
Screen mesh size: 1mm Triple-layer drum structure (each screen is independent) Suitable for liquid products.
Hiroshima, Japan
GL reactor 100L
- used
Capacity: 100L Jacketed and agitated *The insulation is currently being removed to confirm the nameplate. The nameplate and documentation were not found, so details are unknown.
Hiroshima, Japan
Chuo Kakoki VU-60
- used
- Manufacturer: Chuo Kako Kikai Kikai
Total Capacity: 125L (Actual Capacity: 30L) Jacket Pressure: 1.9kg/cm2G Frequency: 1800
Hiroshima, Japan
Kansai Chemical Machinery Manufacturing 3000L
- used
- Manufacturer: Kansai Chemical Machinery Manufacturing Co.
Capacity: 3000L Design Pressure: Body F.V., Jacket 0.2MPa Design Temperature: Body 95°C, Jacket 132°C Type 2 Pressure Vessel Documentation Available
Hiroshima, Japan
SEC FK-22-10
- used
- Manufacturer: SEC
Cubic type Heat transfer area: 1.53m2 Design pressure: 2kg/cm2G
Hiroshima, Japan
Ikebukuro Horo Kogyo 2000L
- used
- Manufacturer: Ikebukuro Enamel Industry
Capacity: 2000L Design Pressure: Main Unit F.V. ~0.294 MPaG, Jacket 0.39 MPaG Outline drawing available
Hiroshima, Japan
Multitubular heat exchanger
- used
Heat transfer area: 10m2 Material: Wetted parts SUS316 | Quantity saved: One
Hiroshima, Japan