Used Materials Testing in Shandong, China

Digital Strain Meters – Model DSM-Plus

• Manufacturer: Epsilon Technology Corp

The DSM-Plus is ideal for customers who own several extensometers. When a configured extensometer is plugged in, the meter automatically recognizes it. It is also possible to calibrate the same extensometer in mu...

High Temperature Un-Cooled Extensometers (700 °C) – Model 7642

Description These extensometers use a high-temperature capacitive sensor and do not require any cooling. They will operate up to the maximum temperature limit of most environmental chambers used in materials test...

DIN Abrasion Tester

• Manufacturer: RADE

AT150 DIN Abrasion Tester AT150 is also called DIN, Schopper abrasion resistance tester. Compared with common brands tester of Akron and Grasselli, it has many advantages, such as small required specimen, short p...

Miniature Averaging Axial Extensometers – Model 3442RA1

• Manufacturer: Epsilon

With gauge lengths of 1 and 2 inches (25 and 50 mm) and measuring ranges of 0.050 and 0.100 inches (1.2 and 2.5 mm), the Model 3442RA1 was designed for applications where tensile or compressive strength tests on ...

QK-20 Manual V- notch Cutting Machine

• Manufacturer: Notch

Model QK-20 notch cutter is designed to make impact test specimen of simple beam and cantilever beam, and it possesses the features of simple structure, easy operation, stable performance, and it is the necessary...

Miniature Transverse (Diametral) Extensometers – Model 3475

A miniature extensometer designed for general purpose transverse or diametral strain measurements on small or thin specimens. May be used simultaneously with the Model 3442 miniature axial extensometers or the Mo...

HB-3000B Brinell Hardness Tester

Use HB-3000B Brinell hardness tester is a bench-top hardness tester, suitable for the Brinell hardness of annealed and normalized workpieces, casting parts, non-ferrous metals and softer parts or unhardened steel...

Miniature Axial Extensometers – Model 3442

• Manufacturer: Epsilon

Weighing as little as 8 grams, these miniature extensometers are designed to have very low operating force with minimal specimen influence. All use an improved version of Epsilon’s dual flexure design which makes...

Rugged, Long Gauge Length Extensometers – Model 3543

• Manufacturer: Epsilon

With over 15 years of proven reliability in the world’s most demanding testing environments, the Model 3543 extensometer is designed to survive in those applications where standard axial extensometers would not. ...

HVS-ZA Vickers Hardness Measuring System

• Manufacturer: Vickers

HVS-ZA Vickers Hardness Measuring System 1. This system can match a variety of Vickers hardness tester to upgrade stand-alone hardness tester or computer measuring system. 2. This measuring system can be integrat...

Deflection Gages(Deflectometers)

• Manufacturer: Epsilon Technology Corp

Deflection is measured with a single arm with an attached spherical contact tip, similar to those on a dial indicator. The full bridge strain gaged construction provides an electrical output compatible with any e...

HBRVS-187.5ST Senior Digital Brinell, Rockwell, Vickers universal hardness tester

• Manufacturer: Vickers

Main features： 1. Equipped Brinell, Rockwell, Vickers test methods 2. Electronic and electric loading, high precision sensor, with a unique closed-loop control system 3. Eyepiece structure with digital encoder, m...

Sheet Metal r-Value Extensometers – Model 3575AVG

Designed for measuring r-values in sheet metal testing, this extensometer averages the lateral strain at two locations. This model may be used simultaneously with the Model 3542 axial extensometer. Specimen Size:...

Fracture Mechanics Clip-On Gages – Model 3541

The Model 3541 is designed for determination of fracture mechanics parameters such as JIC, KIC, R-curve, fatigue crack growth rate (da/dN), and testing to standards such as E1820, E399, E647, etc. These COD gages...

High Temperature Axial Torsional Extensometers (1200°C or 1600°C) – Model 7650

• Manufacturer: Epsilon

Model 7650 extensometers are primarily used on round specimens tested in bi-axial test machines capable of simultaneous axial and torsional loading. All models are capable of bi-directional displacement in both a...