Used Conveyors in Wallonia, Belgium

Conveyor belt

Including vertical bunker, dimensions approximately 134x105x270cm

Roller conveyor

Roller conveyor

Vibrating elevator conveyor REMEX outlet height 4150 mm

Type : Tu 206-850, serial number: 961149 Conveyor lenght ± 60m with water cooling Tube Ø 42mm

Conveyor - Groninger - MRT 105 - DK2105.WG

• Manufacturer: Groninger

Steep conveyor belt for chips

Dimensions: Length: 1100mm; Width: 640mm; Height: 900mm 0,25kW On wheels Belt consisting of metal plates

Steep conveyor belt HEIDELBERGER

• Manufacturer: Heidelberg

Useful dimensions: total width of the band 500 mm, useful width 300 mm Gearmotor BAUER, 3 hp, 1420 /91 rpm, 220/380 V

Belt conveyor 800/475 mm

Gearbox LEROY SOMER, 4 kW, 220/380 V, 1425/11,82 rpm For pieces, sand, waste With security lines

Alimentation UPS, Feeding UPS, Conveyor - DK2277.WG

Belt conveyor 3100 x 800mm

Drum motor BAUER Without iron feet where the belt above or below runs Conveyor more or less well Belt width 970 mm, Ø 220mm

Vertical screw conveyor, Ø 5500 mm

Able to work vertically It is carried by trapezoid without reducer It can be separated in the middle In very good condition

Rubber belt conveyor for cores ± 31,5m

Dimensions : Longueur : ± 31500mm ; Largeur : 850mm ; Hauteur : 1150mm Dimensions utiles : longueur : 31500mm ; largeur : 645mm ; hauteur utile : 900mm With on/off switch With emergency stop switch 2.2kW;380V Bel...

Sand aerator for belt conveyor, width 450 mm

Motor CEM, type MJUK 132 S, 5,5 kW, 220 / 380 V, 1445 rpm Mounted on a conveyor belt or placed above the sand aerator, length 4000 mm Transmission between motor and fraise by belts With tube for dust extraction, ...

Steep belt conveyor BÖRGER&CO length: 9,7m

• Manufacturer: BÖGER&CO

External dimensions: Length: 1050mm; Width: 1100mm; Height: 800mm Usable dimensions: Length: 9700mm; Width: 650mm (outside), 550mm (inside) With loading hopper Belt with corrugated edge

Screw conveyor ± 2200 mm Ø270 mm

External dimension: Length: 4000mm, Width: 440mm, Height: 550mm Useful dimensions: lenght: +/- 2200mm, depth: Ø 270mm, Motor: brand: Bauer, type: gear box, 2,2 KW, 380V, 1420/60 t/min With 2 inlets 290×290 mm, i...

Screw conveyor 6200 mm, Ø 250 mm

Ø 250 mm Gear motor SEW, type: R 62DT 100 L4; serial number: 3052533801.009.97; 3,3 kW; 380 V; 50 Hz; 1400 rpm