Used Processing in Portugal

Pre-filter QM 34

QM Pre-Filter - Micron Grade 5 Should always be installed before the dryer. A long service life combined with excellent heat resistance to heat and abrasion makes it ideal means of initial protection of a compres...

Air Dryer PS18 - 1800l/min

Speed screw comp. Variable mod.NOBEL 11-10 DV

Technical characteristics: PS.V60CE97PWSA45 Kw: 11 | Hp: 15 | L/min: 680 / 1699 | C.f.m: 24 / 60 | Bar: 7.5 | Psi: 109 | Db(a): 67 | Kg: 250 | Dimensions l x w x h (mm): 1100 x 750 x 1000 | Technical characterist...

Suction unit model 3B

• Manufacturer: Cetrus

Power: 3 KW Suction power: 300 m3/h Filter surface: 0,57 m2 Depression: 1600 mm H2O Motors: 1 Height: 1100 mm Width: 760 mm Length: 920 mm Weight: 170 Kg

Suction unit model 4B

• Manufacturer: Cetrus

Technical data: Power: 4 KW. 3 /h. 2 Flow: 500 m | Filter surface: 1,8 m | No. of engines: 1. | No. of utensils: 5. | Maximum line length: 100m.

Preparation area with plenum with filter box

• Manufacturer: Cetrus

- Impulse filter plenum: 4800 x 2400mm - 8 ceiling fixtures with 3 x 40 Watt bulbs each - Self-supporting structure - "EU1" dry air extractor unit - Inflation unit - 1 4kW (5.5hp) electric motor - 1 Centrifugal f...

Simple preparation area with filter box

• Manufacturer: Cetrus

Dry air extractor unit type "EE1" ON/OFF control panel

Lemorau MEBR+

• Manufacturer: LEmorau

Lemorau M EBR + is a modular digital finishing machine designed for ultimate flexibility. Add or upgrade modules to match your production needs. The die-cutting unit works in semi-rotary for short runs and full r...

Lemorau CT 1500

• Manufacturer: LEmorau

Lemorau CT 1500 is a manual core cutter that is compact, efficient and cost effective. It produces an accurate, clean, quality cut with quick and easy change-over for multiple core diameters and wall thickness. C...

Mixing tank with motor and mixer for 2-component glue

MIXING TANK WITH ENGINE AND MIXER FOR TAIL TO 2 COMPONENTS, TANK CAPACITY TOTAL 250 LT; BENEFITABLE CAPACITY 150 LT; COPIED FUND; Ø 600 MM; TOTAL TANK HEIGHT 810 MM; TANK IN STAINLESS STEEL ROD IN STAINLESS STEEL...

Tank for preparation, mixing of salts of ammonium sulphate in water.

Tank for preparation, mixing of ammonium sulfate salts in water, polyethylene tank resistant to ammonium sulfate and possible urea contamination. total tank capacity 300 lt; useful capacity 150 lt; cupped bottom;...

PL-3E infrared dryer

-3E

Fine Oil Separator Filter - HM 30

• Manufacturer: Cetrus

HM filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after the QM and PM filters. This is a filter very similar to the PM series, differing only in the degree of filtration. This fi...

Fine Oil Separator Filter - HM 10

• Manufacturer: Cetrus

HM Filter - Filtration grade 0.01 micron + residual oil 0.01 mg/m 3 To be installed after QM and PM filters. It is a filter very similar to the PM series, differing only in the filtration grade. This filter allow...

Oil Separator Filter - PM 72

• Manufacturer: Cetrus

PM Filter - filtration grade 1 micron + residual oil 0.5 mg/m 3 To install after the drier or QM filters. This filter, following the principles of shear and coalescence, forces the particles of the oily fluid to ...