Used Machine Tools in Saxony, Germany

WMW AP205x195x65

• Manufacturer: WMW

14 plates available T-slots according to DIN 650 for T-slot nuts according to DIN 508 a=13.9; b= 24.2; c= 9.8; h=19.9 mm

Clamping Units Rottler

• Manufacturer: Rottler

4 pieces clamping claws Dimension per clamping claw: L: 420 x W:400 x H: 400mm Clamping surface 80 x 80mm, clamping on both sides Clamping travel approx. 120mm Clamping width flexible Mounting: -Base area LxW: 42...

Clamping Units SEDIN STANKO

• Manufacturer: Sedin

These 4x clamping claws are for sale. Used as workpiece clamps for turning and drilling work Cast steel construction Workpiece holder: Clamping surface WxH: 70 x 65mm, internal and external clamping, clamping str...

WMW 800x455x250

• Manufacturer: WMW

ram plate of a PYE 160S press Use: e.g. for reducing the installation height of the press or shortening the working distance (forward run) - with centre bore Ø 40mm continuous - with 6x part circular drilling Ø 1...

WMW 810 x 690 x 190

• Manufacturer: WMW

T-slots centric Type of control: other | Freight basis: EXW, free on truck unpacked | Storage location: Leipzig 3 | Floor-plate length: 810 mm | Plate width: 690 mm | Plate height: 190 mm | Hole diameter: ca. 119...

bolster plate AP 3500x2000x360 (5768)

There are 2 plates for sale. (price per plate) Surface milled Longitudinal groove Quantity 8 Size a=35mm,h=62mm,b=60mm,c=25mm Center distance 250mm Side fastening D=27x58mm Quantity long side 3 short side 2

1986 NARADI PRAHA JU 30

• Manufacturer: NARADI PRAHA

air pressure clamping unit application area operation of vise clamping consists: air pressure motor, impuls mechanism and a control mechanism air pressure supply necessary averaged operation pressure 0,4- 0,6 MPa...

ROTO RECORD 4 jaw chuck

• Manufacturer: ROTO RECORD

4-jaw chuck, four-jaw chuck ROTO RECORD, WMW DH 315 x 4-II ( DH315x4-II ) used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 200 x 3 - III ( DH200x3-III ) TGL 30-2333 3x threaded hole: M10 x 1.5, depth: 30 mm used, tested!

PAGUS 3-jaw chuck

• Manufacturer: Pagus

3-jaw chuck, three-jaw chuck, power chuck, wedge-hook chuck with adapter PAGUS without baking ! Used!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 130 x 3 (DH315x3) TGL 30-2333 Thread: M18 x 1.5, length: 20 mm (left-hand thread) Bore: Ã 30 mm, depth: 55 mm used, tested!

Ku289

• Manufacturer: Pagus

Magnetic coupling VEM Dessau KLDO5 TGL 22050 ( TGL22050 ) New !

VEM magnetic coupling

• Manufacturer: VEM

Magnetic coupling VEM Â Dessau 3KL5 TGL 4734/59 ( TGL4734/59 ) used, repaired, tested!

PAGUS magnetic coupling

• Manufacturer: Pagus

Magnetic coupling PSP POHONY ELS 1.25 24V CSN 02 6517 ( ?SN026517 ) 4431013/63 used, tested!

VEM magnetic coupling

• Manufacturer: VEM

Magnetic clutch , without clutch basket VEM Dessau KLDO10 TGL 9922 ( TGL9922 ) used, tested!