Used Motion Controllers in California, USA

Huber GmbH 6-axis motorized stage with encoders

• used

• Manufacturer: Huber

6 axis translation stage: all axes are motorized Configuration from bottom to top: Large Goniometer: Roll Single Y axis linear stage Theta stage: Rotation 2 Fine Goniometers: Pitch and Roll Vertical Z axis ...

Suruga Seiki KS103-100 linear stage with 100mm travel

• used

• Manufacturer: Suruga Seiki

KS103-100 Motorized X Axis Crossed Roller 120x160mm Platform 100mm Travel Stage The Suruga Seiki KS103-100 is a motorized X axis linear crossed roller stage with a stage platform size of 120x160mm, load capacity...

Newport TSW300DC 2-Axis 300mm XY Stage, Newport RTM160CC Theta Stage

• used

• Manufacturer: Newport

Newport TSW300DCxTSW300DC wide platform precision linear XY stage with 12"x12" XY travel Newport RTM160CC theta stage with 360 rotation MM-3000 controller with 4 axis control, direct drive DC motors glass sc...

Newport PM500-1A.100 Linear Stage with 25mm Travel and 1um Accuracy

• used

• Manufacturer: Newport

PM500 series ultra precision motorized closed loop actuator, linear glass scale is incorporated in spindle assembly for >1um accuracy over full range, 25mm travel, must be driven by Newport PM500-C6 controller, 7...

Melles Griot 07 TEZ 004 Z-Axis Vertical Translation Stage

• used

65mm x 65mm vertical translation stage, 10mm travel, 5Kg load capacity, 1/4-20 mounting holes, micrometer with 12mm travel.

Newport 271 300lb Capacity Lab Jack

• used

• Manufacturer: Newport

Lab jack, platform 4.375"x 6.5", operating range 2.4" to 4.2, load capacity 300lbs, 3 milliradian parallelism, orthogonal hinges minimize wobble, tilt, and twist.

Aerotech AVS-105 Z-Axis Vertical Translation Stage

• used

• Manufacturer: Arix

Precision lead screw translation stage with 5mm vertical travel, 0.1um resolution, 10kg capacity, BMS 60 series brushless servo motor.

Newport ESA-C 3-Axis Microdrive with IEEE

• used

• Manufacturer: Newport
• Model: ESA-C

3 Axis controller with submicron positioning capability and GPIB interface, digital display of all 3 axes simultaneously

Newport TST150DC.1 XY Linear Stage for Transmitted Light

• used

• Manufacturer: Newport

Transmitted light precision XY linear stage with 6"x6" travel high precision glass scale encoders with 0.1u resolutio DC direct drive motors, crossed roller bearings 7075 aluminum construction, requires ESP o...

Newport M-PM500-1L Linear Stage with 25mm travel

• used

• Manufacturer: Newport

25mm travel, 0.05um resolution, 40N load capacity, may be mounted in XY configuration, includes interface card and cable for the PM500C controller

Thorlabs NRT100/M Linear Stage with 100mm Travel

• used

• Manufacturer: Thorlabs

100mm travel stepper motor linear translation stage with microstepping resolution 1 micron repeatability use Thorlabs BSC103 controller (10 available)

Klinger MT160-250 250mmTravel Linear Stage

• used

• Manufacturer: Klinger

Single axis translation table with 250mm travel, 10um resolution, 100KgF load capacity, 19 pin connector, stage may be operated with CC1.2 or MC4 controller, stage may also be operated manually.

Newport TS100X100DC.5 XY Linear Stage, 4x4 Travel, 0.5micron Resolution

• used

• Manufacturer: Newport

Precision linear XY stage with 100mm x 100mm travel and 0.5 micron resolution, maximum speed 75mm/sec, load capacity to 45kg, DC motors, 1/4x20 holes on top plate, driver modules available for MM and ESP series c...

PI Physik P720.00 Piezoelectric PIFOC nanopositioning scanner

• used

• Manufacturer: Physik Instrumente

PIFOC scanner for small objectives, piezoelectric, 100u travel, 0.5 nm resolution, shown in photo with Olympus objective (not included). max objective diameter 25mm Push/pull force capacity 100/20N

PI P-287K020 Vertical/ tilt Piezo Flexure stage

• used

Pi vertical/tilt piezo flexure stage for high vacuum applications

sn 2030385001

see PDF below