Used Motion Controllers in British Columbia, Canada

Zaber GSM-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation Crossed roller bearings for smooth motion and high stiffness Designed for u...
Vancouver, Canada
Zaber GSM Series
- Manufacturer: Zaber
40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation 30 N load capacity Low profile, small footprint Designed for use with an X-MCC Series stepper motor contro...
Vancouver, Canada
Zaber VSR-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 20 mm or 40 mm travel Up to 48 mm/s speed and up to 200 N thrust 10 kg load capacity 55 or 85 mm retracted height Only 7 feedthrough wires required to control these units Designed f...
Vancouver, Canada
Zaber RSW-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr Speed up to 100 °/s and torque up to 100 N⋅cm 20 kg load capacity Worm gear driven for continuous rotation Only 7 feedthrough wires required to control these units Designed for use ...
Vancouver, Canada
Zaber X-GSM-E Series
- Manufacturer: Zaber
30 N load capacity Low profile, small footprint 40 mm and 60 mm centre of rotation options allow for two axes of motion about a common centre of rotation Encoder position feedback with slip/stall detection and au...
Vancouver, Canada
Zaber LSM-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber LSM-V2 Series
- Manufacturer: Zaber
Vacuum compatible to 10-6 Torr 25, 50, 100, 150, 200 mm travel Up to 100 mm/s speed and up to 35 N thrust 10 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepper ...
Vancouver, Canada
Zaber RST-DE Series
- Manufacturer: Zaber
Speed up to 24 °/s and torque up to 10 N⋅m 50.8 mm (2 inch) aperture with kinematic mounting options for repeatability of assembly 50 kg centered load capacity Continuous 360° rotation stage Direct reading encode...
Vancouver, Canada
Zaber LRQ-V1 Series
- Manufacturer: Zaber
Vacuum compatible to 10-3 Torr 75, 150, 300, 450, 600 mm travel Up to 205 mm/s speed and up to 100 N thrust 100 kg load capacity Designed for use with an X-MCC Series stepper motor controller or any 2-phase stepp...
Vancouver, Canada